Tomorrow, because proper maintenance is a key to optimum, injury-free use, we’ll cover how to keep your saw in tip-top condition. There are two methods to safely start a chain saw: on the ground and, yes, between your legs. “Pinching the bar” is a good segue into the directional pressures present in the limb, log, or standing tree that dictate how the saw operator will approach the cut.
Kickback happens when the chain’s rotational energy gets thrown back at you, and you lose control of the saw. LINEAR KICKBACK. If the chain gets pinched on either side by the wood being cut, the whole saw can get pushed back at you, full speed. PULL-IN KICKBACK. If your saw hits a branch on the other end of the wood, or even a nail, it can yank the saw forward and away from you.
Before you go firing that bad boy up and hacking away at everything in sight, there are a few rules you need to follow for how to use a chainsaw safely. If you don’t own a chainsaw yet, and you’re reading this guide just to get a good idea of how to operate one before you buy it, I invite you to check out my top battery chainsaw reviews. As a reminder, if you’re in the market for a new chainsaw, don’t forget to check out my top battery chainsaw reviews, top chainsaws list, and the best chainsaws for firewood.
Do it the right way and prevent chainsaw injuries and chainsaw cuts. We enlisted a chainsaw expert to walk us through the process of cutting up a large fallen tree. Cut with the top or bottom of the bar and chain, but avoid the kickback zone Kickback zone on a chainsaw. Avoid cutting with the “Kickback zone” of the chainsaw bar. Keep control of the chainsaw while you’re cutting by using an encircling grip. Finish the cut by sawing upward to meet the first cut. Chainsaw Cuts: Cutting the Tree Trunk Photo 4: Start cutting downward in the trunk.
how to run chainsaw Related Question:
What do you need to run a chainsaw?
Don’t scrimp on safety gear when doing chainsaw work. You’ll need a chainsaw helmet with face screen, chaps, and gloves. And don’t ignore footwear. Regular work boots are okay if you’re using your chainsaw in your backyard, but if you’re out in the woods, it’s safer and more efficient to wear logging boots.
Should you run a chainsaw at full throttle?
Engine Protection Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
Are chainsaws easy to use?
If you need to do regular maintenance in your backyard, perhaps removing branches here and there or cutting down small trees, then a small gas-powered chainsaw with a 16-to-18-inch bar is an irreplaceable tool. Due to the small weight and size of the chainsaws in that class, they are really easy to use.
Can you use a chainsaw on a ladder?
Never operate a chainsaw on a ladder, and never cut limbs that are higher than your shoulder. (If you’re looking to cut something higher, consider an altogether different tool: a manual rope saw, often called a pocket chainsaw.)
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Do you need to break in a chainsaw?
Typically we recommend a break in period of 6-10 tanks of fuel. During this period the engine should not be allowed to run at high RPMs for extended periods of time.
How long should you run a chainsaw?
Depending on the type and usage, you can expect a gas Chainsaw to run between 15 and 40 min before you have to fill it up again. Most battery-powered chainsaws have a run time of up to 2 hours, but there are high-capacity power packs that will last much longer.
How do you cut a chainsaw?
Teeth are arranged in alternating right/left fashion to help a chain cut evenly and straight. Depending on the length of the chain for a certain size bar, there will either be an equal number of alternating left hand and right hand cutters, or the chain will end with 2 back to back same-side cutters.
Can you cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Can you cut dry wood with a chainsaw?
When it comes to actually cutting these wooden discs, your mind probably doesn’t immediately jump to a chainsaw as your tool of choice. But a chainsaw actually makes it easy to cut wood slices, especially if the raw material is a log, stump, or other large chunk of wood.
Can you cut tree roots with a chainsaw?
Once you’ve sliced the stump almost all the way to the ground, continue cutting it — and the soil — diagonally and at different angles. Don’t go more than a foot into the soil. Chainsaws are powerful machines, and you don’t have to worry about dirt damaging it or knocking the chain off.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
Are electric chainsaws safer?
Safer to Use Electric chainsaws have several features that make them safer for casual users than their gas-powered counterparts: Lower chain speeds. Chains that run only when you’re actively cutting with your saw. Bars that measure no longer than 18 inches.
What weight oil is chainsaw bar oil?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.