Learning How to Start a STIHL Chainsaw is fairly easy once you know the correct steps. Otherwise, the steps on how to start your Stihl chainsaw remain the same for both hot and cold starting. So you’ve followed all the steps on how to start your Stihl chainsaw and it still won’t start or run.
Starting a chainsaw is not difficult, but it does require following a few simple steps in a precise order. Fill the chainsaw with the proper mixture of fuel and the correct type of oil according to Stihl recommendations for your model. Press down on the fuel bulb a few times when starting the chainsaw for the first time or when restarting after refilling a saw that has run out of fuel.
how to start a stihl chainsaw Related Question:
Why does my Stihl chainsaw not start?
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel will evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting.
Are Stihl chainsaws hard to start?
Regular maintenance will help to ensure that your Stihl chain saw will always start. In addition, some storage steps can help with starting when the chainsaw has been left for an extended period. Problems starting a Stihl chain saw can be related to gasoline storage, spark plugs, and incorrect starting procedures.
How do you start a choke on a Stihl chainsaw?
Set the chain brake on your saw and put the master control lever into the choke position. Pull the starter cord until the engine begins to turn over. Quickly switch the master control lever to the warm-start position and pull the starter cord until the engine starts to run, instructs Stihl Corporation.
How does Stihl easy start?
Compared with conventional starters, the STIHL Easy2Start™ not only requires less effort, but also allows the starter rope to be pulled approximately two-thirds slower. The even pull on the starter rope overcomes the engine’s compression to minimize the strength and effort required to start.
How do you start a chainsaw that won’t start?
If you believe fuel has flooded the chainsaw engine, pull the starter cord several times while holding the throttle, dry and replace the spark plug, and then try starting the chainsaw again.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
How long to wait if chainsaw is flooded?
Many people wonder if a flooded chainsaw will fix itself? The answer is yes, but not always. By letting the chainsaw sit for about 20 minutes it will allow some of the fuel inside the engine to evaporate.
Why does my Stihl chainsaw pull so hard?
If your chainsaw is hard to pull, here are some common causes: The pully system is snagged or stuck. The starter assembly is stuck or sticky. The housing may be damaged.
What is the choke on symbol?
The choke on symbol for most small engines looks like a horizontal ( — ) or diagonal ( / ) line. It also can simply say ‘Choke’, ‘Full Choke’, or ‘Start’. The off symbol for most small engine chokes is represented by a vertical line ( | ) or the word ‘Run’. Hopefully you have learned something here.
What is the choke position?
The choke is located before the throttle, and manages the total amount of air going into the engine. The choke is only used when starting a cold engine. When doing a cold start, the choke should be closed to limit the amount of air going in.
What is the easiest starting Stihl chainsaw?
The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier.