Since saw chains have cutters that alternate orientation along the chain, you need to use a chainsaw sharpener on all cutters on one side, then swivel the chain holder and tackle those pointing the other way. An electric chainsaw sharpener is ideal for this kind of periodic chain maintenance, though you will need to change the abrasive wheel to an extra-wide version made for this work. No matter how you use a chainsaw sharpener, it makes sense to keep an extra chain or two on hand, sharp and ready to go as you’re working in the forest.
XTo sharpen a dull chainsaw, clamp the bar of the chainsaw to your work station and tighten the chain using the tension adjusting screw to make sure it won’t move. Use a permanent marker to draw a line on the link where you’re going to start filing, and get a specialty chainsaw file that’s the same diameter as the chainsaw teeth. To file, hold the file between the teeth at a 30 degree angle, and slide it across the face of the cutter 3-10 times until it is sharp.
File Sharpening Using a file to hand sharpen a dull saw chain might seem like a very slow way to go. Bench-Top Sharpeners If you use a chainsaw all year-round or if you own more than one chainsaw, then you can save a significant amount of time and energy by sharpening the saw chains with a bench-mounted sharpener. A bench-top sharpener is certainly the quickest, most accurate way to sharpen a saw chain, but just as importantly it makes it nearly impossible to ruin a saw chain by grinding away too much material.
how to sharpen small chainsaw Related Question:
Is it worth sharpening a chainsaw?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
Why does my chainsaw blade dull so quickly?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
How much does it cost to have a chainsaw sharpened?
The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.
How often does a chainsaw need sharpening?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
What’s the best angle to sharpen a chainsaw chain?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.
What size file does a STIHL ms170 use?
STIHL chains and the file size is 5/32 in.
What size file do you use on a 3/8 chainsaw chain?
With that said, the Stihl 3/8″ chain is identical in size to Oregon and other brands which all recommend a 7/32″ file.
Are all chainsaw depth gauges the same?
A: When depth gauges are uneven, each cutter tooth on the chain takes a different sized bite. This causes the chain to cut rough and vibrate. If the depth gauges are higher on one side than the other, this causes the chain to cut crooked. The cut will pull in the direction of the side that has the lower depth gauges.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Why does my chainsaw cut curves?
Two main reasons will cause the chain to cut on a curve. The most common reason is from improper hand filing. If one side of the teeth is more heavily damaged, sharpening them down will make them smaller than the other side.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Are electric chainsaw sharpeners good?
Electric chainsaw sharpeners work very well and are very powerful, restoring your chain to as-new condition with very little effort. However, they are usually more expensive and you do have to be careful not to overdo your sharpening, as you can end up filing the cutters too low.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
Does Ace Hardware sharpen chainsaw chains?
Our experienced professionals will machine sharpen your chain saw for pitch-perfect cutting edges: tooth-after-tooth. Bring your chain saw into Steadman’s Ace Hardware and let one of the friendly, experienced mechanics give it a tune up.