Tomorrow, because proper maintenance is a key to optimum, injury-free use, we’ll cover how to keep your saw in tip-top condition. There are two methods to safely start a chain saw: on the ground and, yes, between your legs. “Pinching the bar” is a good segue into the directional pressures present in the limb, log, or standing tree that dictate how the saw operator will approach the cut.
Before you go firing that bad boy up and hacking away at everything in sight, there are a few rules you need to follow for how to use a chainsaw safely. If you don’t own a chainsaw yet, and you’re reading this guide just to get a good idea of how to operate one before you buy it, I invite you to check out my top battery chainsaw reviews. As a reminder, if you’re in the market for a new chainsaw, don’t forget to check out my top battery chainsaw reviews, top chainsaws list, and the best chainsaws for firewood.
Kickback happens when the chain’s rotational energy gets thrown back at you, and you lose control of the saw. LINEAR KICKBACK. If the chain gets pinched on either side by the wood being cut, the whole saw can get pushed back at you, full speed. PULL-IN KICKBACK. If your saw hits a branch on the other end of the wood, or even a nail, it can yank the saw forward and away from you.
how to use small chainsaw Related Question:
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
Are chainsaws easy to use?
If you need to do regular maintenance in your backyard, perhaps removing branches here and there or cutting down small trees, then a small gas-powered chainsaw with a 16-to-18-inch bar is an irreplaceable tool. Due to the small weight and size of the chainsaws in that class, they are really easy to use.
Do you start a chainsaw with the brake on or off?
Check the Chain Brake When engaged, the chain brake stops the chain from rotating around the saw’s guide bar. When using a chainsaw, you should always start it with the chain brake engaged so the chain does not move.
What does the choke do on a chainsaw?
The choke position increases the richness of the air and fuel mixture the carburetor sprays into the cylinder. With the master control lever in the choke position, the flow of fuel into the engine increases and the flow of air decreases.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can you cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
What causes a chainsaw to kick back?
Kickback is the term to describe the unexpected upward motion of the guide bar. Kickback occurs when the end portion of the nose of the bar (the kickback zone) strikes an object and the chain momentarily snags, or is pinched.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
Are electric chainsaws safer?
Safer to Use Electric chainsaws have several features that make them safer for casual users than their gas-powered counterparts: Lower chain speeds. Chains that run only when you’re actively cutting with your saw. Bars that measure no longer than 18 inches.
Do you want the choke open or closed?
Should Choke Be Open Or Closed When Running? Having been in operation over the last few days, a gas engine that is still warm doesn’t require an choke. When it is warm, the fuel can evaporate quickly. It is recommended you close the choke the most if the engine is cold outside and it is warming outside.
What happens if choke is left on?
Leaving the choke on for too long will cause unnecessary engine wear and waste fuel. This is also bad for the environment. The choke is mainly used during winter to help with starting. The engine needs its fuel to be vaporised in order to burn it.
What is the choke on symbol?
The choke on symbol for most small engines looks like a horizontal ( — ) or diagonal ( / ) line. It also can simply say ‘Choke’, ‘Full Choke’, or ‘Start’. The off symbol for most small engine chokes is represented by a vertical line ( | ) or the word ‘Run’. Hopefully you have learned something here.
Can you cut frozen wood with a chainsaw?
It’s not impossible to cut frozen wood with a chainsaw, but it is extremely difficult. Cutting wood requires a sharp chain and frozen wood will dull your chain.