Multiply the above number by the number of teeth of the saw sprocket. Multiply that number by the saw R.P.M.The final answer will be the chain speed in inches per minute, just divide by 12 to convert to feet per minute.
12,000 revolutions per minute / 60 seconds per minute = 200 revolutions per second! The piston travels up 200 times and down 200 times in the time it takes to say “One Husqvarna, …”,. 84,000 drive links per minute X.75 inches per drive link = 63,000 inches per minute. 63,000 inches per minute X 60 minutes per hour = 3,780,000 inches per hour.
A chainsaw piston goes up and down in the cylinder 20,000 times per minute. The piston ring speed on the average chainsaw travels 2,500 surface feet per minute. Our largest chainsaw is one of the most powerful in the world.
For a saw, the reading should range between 10,000rpm and 14,000rpm.
how fast does a chainsaw spin Related Question:
How fast does a chainsaw spin RPM?
Depending on your saw, the reading should be between 10,000 and 14,000 rpm. That’s a wide variation, and so it’s important to look up the maximum speed of your saw before conducting this test. The engine should never run faster than the maximum speed at which it is designed to run.
How fast does a chainsaw motor go?
How Fast Does A Chainsaw Motor Go? An average chainsaw takes 2,500 hours to travel at 2,500 feet per minute using the piston ring speed. Chains are flown across the sawbar rail at speeds as high as 5000 feet per minute while a chain is engaged in the operation. An average chain moves from 55 to 60 metres in length.
What is the fastest chainsaw chain?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
How fast is a Stihl saw?
The chain saw has a massive 4 ft long guide bar and a 120cc engine that throws out 8.7HP. This huge saw weighs less than 10 kilos, so its power-to-weight ratio is better than some top performance road bikes. At full speed a STIHL chain saw chain makes a cut in the wood over 500 times per second.
What is the most aggressive chainsaw chain?
404 chains are the most aggressive. The 3/8 is a more flexible size with adequate strength, low weight and substantial cutting speed. It can also can handle the power of a 50-100cc chainsaw engine.
What is the advantage of a skip tooth chain?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
What’s the biggest chainsaw Stihl makes?
The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw. With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful saw in the STIHL lineup.
Can a chainsaw cut through bone?
Bones may be slightly tougher, but they are rigid and a chainsaw will likely be able to cut through them without much problem – though it will probably dull the blade more than wood.
How was a chainsaw used in childbirth?
Two doctors invented the chainsaw in 1780 to make the removal of pelvic bone easier and less time-consuming during childbirth. It was powered by a hand crank and looked like a modern-day kitchen knife with little teeth on a chain that wound in an oval.
What is a digital tachometer?
Digital Tachometers are relatively straightforward meters that measure the rotational speed of motors and machinery.
How do you use a non contact tachometer?
When using a non-contact handheld tachometer, a reflective mark is placed on the spinning object. A paint marker or strip of reflective tape can work, provided that the rest of the surface has a dark or otherwise non-reflective surface. A non-contact tachometer sends out a beam of light.
What chainsaw do professional loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Why does my chainsaw chain dull so quickly?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
How long should a chainsaw blade stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.