Tomorrow, because proper maintenance is a key to optimum, injury-free use, we’ll cover how to keep your saw in tip-top condition. There are two methods to safely start a chain saw: on the ground and, yes, between your legs. “Pinching the bar” is a good segue into the directional pressures present in the limb, log, or standing tree that dictate how the saw operator will approach the cut.
Do it the right way and prevent chainsaw injuries and chainsaw cuts. Cut with the top or bottom of the bar and chain, but avoid the kickback zone Kickback zone on a chainsaw. Chainsaw Cuts: Cutting the Tree Trunk Photo 4: Start cutting downward in the trunk.
Before you go firing that bad boy up and hacking away at everything in sight, there are a few rules you need to follow for how to use a chainsaw safely. If you don’t own a chainsaw yet, and you’re reading this guide just to get a good idea of how to operate one before you buy it, I invite you to check out my top battery chainsaw reviews. As a reminder, if you’re in the market for a new chainsaw, don’t forget to check out my top battery chainsaw reviews, top chainsaws list, and the best chainsaws for firewood.
Kickback happens when the chain’s rotational energy gets thrown back at you, and you lose control of the saw. LINEAR KICKBACK. If the chain gets pinched on either side by the wood being cut, the whole saw can get pushed back at you, full speed. PULL-IN KICKBACK. If your saw hits a branch on the other end of the wood, or even a nail, it can yank the saw forward and away from you.
how to use a chainsaw safely Related Question:
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
How do you stay safe when using a chainsaw?
Use Techniques for Safe Chainsaw Operation Maintain good balance and footing. Do not overreach or cut above shoulder level. Do not operate a chainsaw with one hand. Keep a tight grip with both hands wrapping your fingers and thumbs around the top and rear handles.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over. Enter the WORX JawSaw.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
Can you cut wet wood with a chainsaw?
Can you cut wet wood with a chainsaw? Yes, you can cut the wet wood with a chainsaw. Besides, there is a misconception that wet wood can impact the chainsaw bar and chain. But actually, the damp wood will not dull the chainsaw any faster than using it on other types of wood.
Can you cut dry wood with a chainsaw?
When it comes to actually cutting these wooden discs, your mind probably doesn’t immediately jump to a chainsaw as your tool of choice. But a chainsaw actually makes it easy to cut wood slices, especially if the raw material is a log, stump, or other large chunk of wood.
Should I wear gloves when using a chainsaw?
Chainsaw gloves are very essential for using a chainsaw safely. Good cut resistance glove will protect you in case you accidentally hit your glove with the chainsaw. They will also keep your hands warm and protect your fingers against other hazards.
How does chainsaw kickback happen?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
How long should you warm up a chainsaw?
Chainsaw warm-up is briefly starting the machine and letting the engine/motor run for a few seconds. Whether you have one from Husqvarna, STIHL, Craftsman, or Echo, every woodworker would want to have a great sawing day with their tool.
How often does chainsaw kickback happen?
Kickback can happen in the blink of an eye too. In fact, about 30,000 chainsaw-related injuries happen each year, with chainsaw kickback accidents being the most common hazard.
Where should you position yourself when using a chainsaw?
Find a comfortable stance, and keep both feet firmly planted as you work. Hold the chainsaw with two hands and at an angle or a little to one side rather than directly in front of you, in case of kickback.
How common are chainsaw injuries?
According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually. Medical costs for chainsaw injuries based on these facts amount to about 350 million dollars per year.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
How often should you sharpen a chainsaw?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.