Before actually slabbing up lumber using the Granberg Alaskan Chainsaw Mill I had to assemble the mill first. If there is one bit of advice that I could give about the size of chainsaw you need for a Granberg Alaskan Chainsaw Mill is get the biggest saw that you can afford. Buy a brand new chainsaw and a bigger mill – the cool thing about Granberg Alaskan Chainsaw Mills is that you can get all different sizes depending on the size of chainsaw you have – and I would love to saw up a 36″+ walnut someday.
An Alaskan saw mill is a great tool for wood workers, builders, and outdoorsmen. Whether milling beams in a remote site for a cabin or harvesting special wood for musical instruments, the Alaskan saw mill is a versatile tool. Often woodworkers, who are cutting material for furniture or instruments, prefer to cut partially finished lumber with their saw mill.
how to set up chainsaw mill for first cut Related Question:
Are chainsaw mills worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
How big of a chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
What is milling with a chainsaw?
A chainsaw mill or PortaMill or Alaskan mill or Alaskan sawmill or Logosol sawmill is a type of sawmill incorporating a chainsaw, that is used by one or two operators to mill logs into lumber for use in furniture, construction and other uses.
What is a rail mill?
Rail milling is a spark- and dust-free rotational cutting process where material is cut out of the rail surface in the form of ‘chips’. Each cutter head consists of 140 to 220 carbide inserts, depending on its diameter.
What is a chainsaw guide bar?
Guide bars provide precise guidance to the chainsaw with minimal friction loss. They have to take on the toughest jobs without warping. The two basic types − the Rollomatic and Duromatic − have been designed to handle different requirements and areas of application. Rollomatic bars are ideal for everyday use.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
Can you use a chainsaw on lumber?
Yes, you can use a chainsaw to cut wet wood.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
Does skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
What angle is a ripping chain?
The teeth on most crosscut chains are sharpened at 35 degrees, while ripping chain teeth are commonly sharpened at 10 degrees, which makes for much faster and more efficient cutting, especially for milling work.
What’s the difference between 404 and 3/8 chain?
Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.