It will naturally take longer to cut a large log with a small chainsaw. Another trick when using a small chainsaw to cut a large log is to buy a longer guide bar. If you want to know how to cut a large log with a small chainsaw, you’re not alone.
Well whatever the reason is, I’ll be showing you how to cut a large log with a small chainsaw. After you’ve cut as deep as you can into the log, you’re going to roll over the log and re-enter into the cut. You cut a large log with a small chainsaw by making cuts into the logs as deep as possible and then rolling the log onto the other side.
First cut should cut should be made from the underside towards the top about 1/3 of the way through the log. Once you had assessed the situation, begin to cut the limbs supporting the tree, cut from under these limbs to avoid the chainsaw getting pinched or stuck. Make an initial cut upwards, about 1/3 of the way through the branch, a short distance from the trunk of the tree so you have room for the final cut which will be close to the trunk.
“Bob, you fear a pinched bar. As you are cutting, keep an eye on the kerf. If that space shows the slightest sign of starting to come together, jerk the saw out quickly. But I would simply cut as much as possible all the way on the log and then roll that sucker over to finish the cuts. A 16” bar should be okay for that size log. Rolling though might require a cant hook, which most everyone should own.
how to cut logs bigger than chainsaw Related Question:
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
How do you cut a log without pinching it?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
How do I stop my log slices from splitting?
Thin wood slices soaked in denatured alcohol will dry without shrinking so quickly that cracks form. Fill your container just over halfway full with denatured alcohol so you can soak the slice without the liquid spilling over the sides.
Can you cut logs with a circular saw?
Circular saws are great for cutting plywood and 2x’s, but you can also cut everything from logs to concrete to steel beams with the right blade or the right type of saw.
What side of the tree do you make the first cut?
Start Cutting Branches at the Trunk Work from the left side of the trunk (as you face toward the top of the tree). This allows the safest and most efficient use of the chain saw because you can rest the side or bottom of the saw on the trunk and slice off the branches with a pivoting motion.
What should you not do when a tree falls off?
When cutting up a felled tree, avoid touching the ground with the chain because even a brief encounter will severely dull the cutting teeth on your chain saw. If possible, cut partially through the tree and then rotate it to cut the rest of the way through.
How do you drop a tree in the direction you want?
Move away at an angle of 45 degrees from the back of the tree’s falling direction. In other words, if the tree is falling in the direction you planned, move away from the tree at a 45-degree angle from the center of your back cut.
What is a boring back cut?
On trees leaning backwards or in other undesirable directions, a bore cut allows you to use wedges to control the direction of its fall. When you make a bore cut, a strap of wood at the back of the tree holds it safely and securely, allowing you all the time you need to make the hinge exactly the way you want it.
What happens when a tree barber chairs?
A barber chair occurs when a tree being felled delaminates vertically before the hinge is cut thin enough to bend. The term refers to the sliding action of the old style barber chair that positioned patrons in a head down, feet up position so the barber could more easily shave with the straight razor.
Can you cut with the tip of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.