You don’t have to use a Stihl sharpening guide with your Stihl chainsaw; any brand should work to help you guide your round file as you sharpen the teeth. Push the sharpening guide onto the chain so that the master cutter is centered in the guide. Stihl uses hardened rivets to maintain the chain strength, so you don’t have to worry about the guide harming them as you push it in place.
PlanItDIY is a source for inspiration, ideas and how-to advice to help you plan and complete your DIY projects and connect you with your local independent home improvement retailers. Your saw chain will require sharpening from time to time. What this video from STIHL on how to properly inspect your chain for wear and tear and how to sharpen the blades safely and correctly.
how to sharpen a chainsaw video stihl Related Question:
What angle do you sharpen a Stihl chainsaw?
STIHL saw chains are generally filed to an angle of 30° – parallel to the service mark for the filing angle. Hold the file so that one quarter of its diameter projects above the top plate.
What angle should a chainsaw chain be sharpened at?
Always file at right angles to the guide rail. The right sharpening angle depends on the saw chain and the wood that you want to cut. The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle.
How much does it cost to sharpen chainsaw chain?
HOW MUCH DOES IT COST FOR YOU TO SHARPEN MY CHAIN PROFESSIONALLY? If you bring the chain into our shop off your saw, our average chain sharpening price ranges from $13- $16.00, depending on the number of cutters.
Do you flip the bar on a chainsaw?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
Why does my chainsaw pull to one side?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Why does my chainsaw blade get dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
How many times can a chainsaw chain be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Does Ace Hardware sharpen chainsaw chains?
Our experienced professionals will machine sharpen your chain saw for pitch-perfect cutting edges: tooth-after-tooth. Bring your chain saw into Steadman’s Ace Hardware and let one of the friendly, experienced mechanics give it a tune up.
What size file do I need for a STIHL 250?
Answer: My MS250 came with a . 325 chain which is a 3/16″ round file. You will need the sharpener for that one.
Why is there a hole in a chainsaw bar?
The hole is part of the manufacturing process when the bar is made at the factory. The milling and heat tempering machines anchor to it and the tail slot. Making a living with a saw since age 16.
What is the hole in the end of a chainsaw bar for?
These two holes are used to hold the saw blade. if your chainsaw blade not have holes or just have one hole. it not work. if you know how to drill, you can drill two holes on your chainsaw blade.
Does cutting wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Why does my chainsaw cut curves?
Two main reasons will cause the chain to cut on a curve. The most common reason is from improper hand filing. If one side of the teeth is more heavily damaged, sharpening them down will make them smaller than the other side.