‘Chainsaw kickback’ is a phrase that is used when discussing operating chainsaws. To ensure absolute safety, it is extremely important to ensure you’re well versed in what it means and how to handle it. To fully prepare for chainsaw kickback you first need to understand what it is, how it happens and how to avoid it.
Step 5: If you are using your saw for felling or crosscutting, boring the chainsaw bar into the trunk may be the best way to cut. Step 7: Pay attention to the nose of your chainsaw bar and how it is positioned. Step 9: Use narrow-nose bars, such as Oregon Double Guard bars, to ensure maximum kickback safety.
Below, we’ll explain chainsaw kickback as well as the kickback zone, causes of kickback, preventive measures, and how to avoid kickbacks in the first place altogether. Chainsaw chaps are preferable because they are chainsaw resistant and are also specially designed to protect the left side of your leg, which is another prime target for a kickback. There are many ways to avoid a potential chainsaw kickback.
Operational: remember, the risks from the saw are not just to the climber. Send the saw aloft using a fail safe system and ensure ground staff are outside of potential drop zones if the saw should fall. Be aware of the risks of using the saw in hedges or trees with multiple branches / epicormic growth.
top handle chainsaw kickback Related Question:
What causes a chainsaw to kick back when trying to start?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
What is the advantage of a top handle chainsaw?
The lightweight design and manoeuvrability of top-handled saws mean that arborists can reach difficult spots while still working safely and efficiently. Traditional, rear handle chainsaws, are more suitable for use on the ground and should not be used at height.
Are Top handle chainsaws any good?
Top handled chainsaws are practical and convenient for use when space is limited, and for this reason, they are the go-to tool when working in trees. They are also compact and easy to wield, meaning some people might prefer them for other everyday use too.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
What is anti kickback chain?
Some chainsaw chains are designed to minimize the reactive force known as kickback. These chains are found on a wide range of chainsaws made for homeowners, arborists, and loggers and are required to be sold on every new saw with an engine displacement of less than 66 cubic centimeters.
What are metal bucking spikes on a chainsaw?
Bumper Spikes: This series of sharp metal spikes protruding from the saw near the base of the bar provide leverage for easier, more controlled sawing. Jab the spikes into the log, then pivot the bar downward to guide the chain through the cut.
When should you use a top handle on a chainsaw?
2. This means that workers can use the top handle chainsaw for pruning work when standing on the ground if it will ensure a higher quality pruning cut or is considered safer than using a rear handle saw. No top handle saw shall be used for any other cutting work on the ground.
Can you use a top handle chainsaw on the ground?
Top-handled chainsaws are only suitable for use off the ground. Operators must use rear-handled saws when working on the ground.
What chainsaw do arborists use?
STIHL chain saws are also the first choice for professional arborists. In combination with STIHL cutting attachments, these powerful lightweights with extra high full-throttle rotational speed impress with their exceptional cutting performance and clean cutting surfaces.
What is an arborist chainsaw?
Arborist chainsaws are essential power tools to climb a tree and prune overgrown branches, or even cut damaged ones due to their lightweight design. The best arborist chainsaw goes beyond this, they’re also easy to maneuver with only one hand.
What is a climbing saw?
A climbing saw will be able to be able to be operated with a single hand and not have a handle to the rear of the saw like pretty much all ground saws apart from vintage saws like the Stihl 009 that are a halfway house with the handle midway between the top and rear.
What’s the safest chainsaw?
Chainsaws are useful when doing work on your home, but they can feel dangerous to use. It’s not too bad if you know what you’re doing, but it’s so easy to make one wrong move—and then it’s game over. Enter the WORX JawSaw.
How do most chainsaw accidents happen?
CHAINSAW ACCIDENTS It occurs when the tip of the guide bar and chain contact an object, forcing the guide bar violently backward and upward. Kickbacks can occur in less than one-tenth of a second, causing severe head, face, neck, shoulder, and hand injuries.
How common are chainsaw accidents?
They can also quickly cause severe injury or death. According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually. Medical costs for chainsaw injuries based on these facts amount to about 350 million dollars per year.
What makes a chainsaw chain more aggressive?
An aggressive chainsaw chain is one that has a higher cutting speed than other chains, and usually has full chisel teeth on a full or skip chain. Experts say the chainsaw brand that makes the best aggressive chains is Stihl, with Husqvarna and Oregon a close second.