If you do not need a large-scale sawmill, there’s absolutely no need to spend more money on one and you would be better off with a chainsaw mill. In order for you to be able to fit your chainsaw into the sawmill, it must be compatible or else it won’t fit. Before you proceed with purchasing a sawmill, you need to make sure that your chainsaw and the sawmill are actually compatible, unless you plan on purchasing an additional chainsaw.
As mentioned, most chainsaw mills clamp the chainsaw bar. Chainsaw mills fall into two categories: edging mills and horizontal mills. Keep reading to learn more about some of the best chainsaw mills on today’s market.
If you are in a hurry and just want to find out what the best chainsaw mill is, then we recommend the Granberg ChainSaw Mill G777 as the best one. Finally, you need to find the best chainsaw mills for the money that is compatible with the type of chainsaw you own. Heavier chainsaw mills do not make the best portable chainsaw mill, so if you cut logs deep in the woods, a lightweight mill will be a better choice.
Despite these concerns, it is still a highly useful piece of gear that will allow you to mill your own wood using your chainsaw. This convenient chainsaw mill is a lightweight and portable piece of kit that will give you the flexibility to cut trees into boards wherever you need to work. Here we have one more affordable chainsaw mill that will allow you to convert your chainsaw into a machine that accurately produces boards, planks and more.
top rated chainsaw mill Related Question:
Are chainsaw mills worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
What size chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
How thin can a chainsaw mill cut?
The Alaskan Mill Mark III Attachment can cut boards as thin as 1/2″ and as thick as 13″. Setup and make your first cut, remove this first slab, then use the Mini-Mill II to edge the log.
How well do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
Can you mill with a 460 rancher?
As I’ve stated before, milling is the toughest task you will put your chainsaw through and having that power is great. But the Husqvarna 460 rancher also has its strong points, and one of the biggest is it won’t wreck your wallet.
How long does it take to mill a log with a chainsaw?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
What is a chainsaw ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
How thick should I mill slabs?
Generally I mill slabs at 2 1/2 – 3 inches thick….. stack and sticker with weight on top.
What is the smallest diameter log worth milling?
I always tell my customers that anything smaller than 8″ on the small end is usually not worth the trouble. Some customers take it to heart and some will throw in everything down to 4″. I will saw a 6″ log if it’s straight but the 4 and 5 inch stuff usually gets put aside.
How thick are mill slabs?
*Cut slabs a minimum of 2″ thick to minimize warping. Saw thicker slabs for specific purposes or projects. If you want to use the warp-prone pith (the log’s center), cut it as a 4–5″-thick slab, as shown at right.
Can you use a chainsaw on lumber?
Yes, you can use a chainsaw to cut wet wood.
How long do logs need to dry before milling?
Depending on the thickness of the lumber and where you live, weather and time of the year, it will take anywhere from 6 weeks to 4 months. Most lumber is in the 1” to 2” thickness and the time above applies to thicknesses. Drying cants, timbers, posts will take considerably longer.