Chainsaw bar oil is a necessary component to operating your chainsaw at peak efficiency and with safety in mind. Formula Chainsaw bar oils are either petroleum-based or bio-based. ‘ Chainsaw bar oil for winter is usually 10W. Very hot temperatures may call for a thicker chainsaw oil, in the 40W to 50W range.
One of the most common points of confusion for new chainsaw users, is the difference between engine oil, and bar and chain oil. Bar and chain oil is a lubricant used to reduce friction caused by the metal-on-metal contact between a chainsaw’s bar and chain. There’s folks out there, that say regular old engine oil works great as a bar and chain oil.
Most high quality or professional chain saws have sophisticated chain oilers that are more efficient and have the capability of controlling the amount of oil being used. FERIC STUDY The Forest Engineering Research Institute of Canada tested and reported on field trials of a vegetable-based oil for lubricating chain saws. Rottne harvester operators noticed a significant reduction in the oil mist that collects on the machines windows due both to the cleanliness of the Binol compared to petroleum-based oil and to the reduced consumption of oil.
The reason a special type of chainsaw bar oil exists is that chainsaw chains and bars need a lubricant with certain qualities to keep those parts running smoothly. Motor oil will work to keep your chainsaw from burning up if you don’t have any standard bar oil on hand. Hydraulic oil is similar to motor oil and you can use it as a chainsaw bar oil substitute when you have nothing else available.
what is in chainsaw bar oil Related Question:
What is chainsaw bar oil made of?
Formula. Chainsaw bar oils are either petroleum-based or bio-based (formulated using vegetable oil). In the course of using a chainsaw, oil sling is inevitable.
What is the difference between chainsaw bar oil and motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
What is special about chainsaw bar oil?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use regular motor oil as my chainsaw bar oil?
If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
Can I use 5w30 for chainsaw bar?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
What kind of oil can you use in a chainsaw?
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
What is bar oil equivalent to?
Canola oil It is thinner than regular vegetable oil, meaning it will tend to fly off the chainsaw more quickly – but it has a more suitable viscosity at lower temperatures so makes a good substitute for chainsaw oil when it is too cold to use vegetable oil.
Can you lube transmission oil as chain?
It’s perfectly fine to use gear oil for lubing motorcycle’s chain, I’m myself using it for years. Use 90 grade gear oil if you lube every 500–700km while the thicker 140 grade oil lasts for 800–1000 km. Also, there’s no need to clean the chain every 500km. Clean the chain when it’s visibly dirty & mucky.
Can power steering fluid be used as bar?
The power steering and gear fluid for your car would work just fine for your saw chain and lube. Synthetic oil, such as power steering fluid and gear oil are great chain lubricant. These are lightweight oil, that can prevent chain brake and bar jamming.
What type of oil does a Stihl chainsaw use?
The gas-oil mix for a Stihl chain saw is 50 to1. That’s equal to 2.5 fluid ounces of low ash two-cycle engine oil per 1 gallon of mid-grade gasoline having an 89 octane rating and no more than 10 percent ethanol. When mixing, pour the oil into the container first and then add the gasoline.
Can I use engine oil for bar oil?
There are many alternative lubes available, but motor oil is the most readily available. It is also an affordable alternative to chain and bar oils when it comes to vegetable oil. There is no need to confuse canola oil with vegetable oil. Fluids that have been drained.