In this review, I will cover the Stihl Forestry Hatchet and compare it to the similarly sized Gransfors Bruks Small Forest Axe. Like any budget friendly axes the Stihl Forestry Hatchet does not come with a sheath. As seen above, the Stihl Forestry Hatchet has a very slim bit.
Of all of the chores I took on, splitting wood was by far my favorite. It’s so I can go out the yard, relive my farmhand days, and swing my Stihl Pro Universal Forestry Axe. The Pro Universal Forestry Axe is a just-right size for cutting down woodstove fuel, eliminating the need for a separate, larger maul and smaller hatchet that would clutter up my tool shed.
Compared to traditional axes you are likely to find around the woodpile, the Stihl Pro Universal Forestry Axe stands out as something different. Hang Your Head. In addition to the overbuilt handle and steel sleeve, the head of the Stihl Pro Universal Forestry Axe is manufactured by Germany’s oldest axe forge, the Ochsenkopf company. The Stihl Pro Universal Forestry Axe head is literally bolted onto the handle with a long screw and additional metal wedge plug and steel endcap all securely attaching the axe head and collar to a fitted handle.
are stihl axes any good Related Question:
Does Husqvarna make good axes?
The 19-inch Husqvarna Carpenter’s axe is a popular axe among outdoorsmen and carpenters alike. Made in Sweden by the same company that makes the highly-regarded Hults Bruk axes, Husqvarna’s axes are also high-quality axes at around half the price or less than Hults Bruk axes go for.
What is a forestry AXE?
Forest axes are robust axes that are solely used for felling trees. They are extremely heavy-duty tools and are too cumbersome to carry around on camping trips, but it would be great to store permanently at a cabin in the woods. These axes have extra long handles and are intended to cut down very large trees.
What is a fallers AXE?
A mid-sized felling axe for general axe chores including driving wedges. Cutting edge is approximately 5″ of overall length and the poll is square. Newly designed head has a larger poll, balanced head and wedge shaped balde with chamferred poll. Forged tool steel head. Made in USA.
Where are ochsenkopf axes made?
Ochsenkopf-axes: synonymous for perfection The axe heads are mostly made from robust C60 steel and sharpened to end up with the sharpest results. The axe handles are also made in Germany from a type of wood from selected forestry areas.
Where are Fiskars axes made?
Did you know that many of the popular Fiskars products are designed, manufactured and tested in Finland? Largely thanks to Finnish craftsmanship, Fiskars has come a long way since it was founded as an ironworks in 1649; today, it is one of the oldest companies in the Western world.
Are Gransfors bruks worth the money?
All good, they work great. Take off the lacquer finish found on the handle, touch up the edge on the buffer wheel and use oil on the handle and their fine. I also have some Wetterlings and use them backpacking, hunting, and in the truck.
What type of axe is best for cutting down trees?
A Felling axe is specifically designed for cutting down trees. They have broad, razor-sharp cutting edges that cut deep into the fibers of the wood with each stroke. Forged with a curved bit, ideal for cutting into fresh wood and fitted with a long handle to provide ample power to the swing.
Why is the blade of an axe thin?
Most axes are fairly thick for wedging and splitting wood or similar material. But a fighting axe is thin for 2 main reasons. Enhanced cutting and penetration. This allows what should be a rather large thick wedge cut through heavy cloth, chain or leather with ease or puncture plate if the design profile is correct.
What axes do loggers use?
The felling axe is an axe specifically designed for the task and usually has a double-edged, sharp surface. This particular axe is available in a variety of shapes, weights, and handle sizes, but lumberjacks generally use the larger types.
Where are snow and nealley axes made?
All the Snow & Nealley axes we sell are made in Maine of 100% US steel and hickory. In the early 2000s, Snow & Nealley sourced their heads from China.
What is an ox head AXE?
Iltis Ox- Head axes are from Wuppertal, Germany. The name Ox Head is synonymous with quality. The carefully hardened steel ensures long-lasting sharpness and durability. These axe heads are medium weight, with an extremely thin blade and wide flare. These features make the axes ideal for blazing and line cutting.
Where are Council tools made?
100% Made in the USA We are proud of our American associates who produce great products at our Lake Waccamaw, North Carolina facility. Thank you for your support of our products.
Should a splitting axe be sharp?
There seems to be some confusion out there on how sharp an axe should be. A chopping axe should be razor-sharp – but a splitting maul doesn’t need to be sharp, it should be dull. Or an axe blade should be sharp enough to cut toilet paper, or you should have a ‘working edge’ not a razor edge.
What kind of steel does Fiskars use?
Fiskars protects its steel types as trade secrets, but it’s known to be a flavor of drop-forged carbon steel. The handle encloses the head, preventing you from changing out the blade.
Who owns Fisker scissors?
Major owners Major shareholders (as of September 30, 2019): Virala Oy Ab, 15.4% Turret Oy Ab, 12.6% Holdix Oy Ab, 12.4%