Choosing the best chainsaw for milling your own lumber will really come down to how large of trees you’ll be working with. If you’re clicking on links that take you to a big box lumber store or Amazon, then you’re not going to be buying a chainsaw capable of milling lumber. Almost anyone who has spent a decent amount of time milling their own logs will quickly tell you that this is the saw you should go with from day one if you’ll be milling with any consistency.
The chainsaw you choose has a big influence on how your chainsaw milling goes – after the milling attachment, the saw is probably the most important part of your setup. Then we see which log size can you mill with each cc saw and finish by analyzing what exactly makes chainsaw milling so power-intensive. In other words, the best saws for chainsaw milling are pricey and best only for milling.
Having a dedicated chainsaw for milling purposes would provide ultimate convenience to handle lumber. We outlined already how a chainsaw offers convenience and helps immensely in cutting down the costs associated with lumber milling. If you are still confused, then go with our suggestion of choosing Echo CS-590 Timber Wolf as it’s indeed the best chainsaw for milling available in 2022 that features a powerful 59.8cc gas engine along with an extra sharp bar and chain.
Power tools like high-end chainsaws can be quite expensive, especially ones that can handle the hard work of milling lumber. If you’re looking for a more affordable option that can still handle the job, then we think we’ve found the best chainsaw for milling lumber for the money. Our pick for the best chainsaws for milling lumber overall was the Husqvarna 460 Rancher Gas Chainsaw.
what is a chainsaw for milling Related Question:
What chainsaw do I need for milling?
What size chainsaw should I use for milling? Go with a chainsaw that can handle a bar that is at least 3 inches longer than the width of the log you’ll be milling. Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment.
Is chainsaw milling worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
Do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
Can you use a chainsaw on lumber?
Yes, you can use a chainsaw to cut wet wood.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
Are portable sawmills worth it?
A portable sawmill can be worth the investment. It can provide a source of wood for your own projects and give you a side business. For a source of lumber, as well as a profitable business, a portable sawmill can be a key piece of equipment on your farm.
How many cc’s do you need for a chainsaw mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be. Consult the chart to see if your chainsaw has enough power to do the job you want it to do.
What is a chainsaw ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
Can you mill with a 60cc chainsaw?
Re: Husqvarna ChainSaws A 24″ bar is too much for a 60cc saw crosscutting, never mind ripping. Torque and lots of it is required for milling, even with that it is still hard work for the operator and the saw.
Can a chainsaw cut a 4×4?
While the best way to cut through a 4×4 is by using a 12-inch miter saw or a 10-inch radial saw or slide saw, those tools aren’t always readily available. With a little ingenuity, it’s possible to make precision cuts with other tools, including circular saws, reciprocating saws, chainsaws, and even handsaws.
What should you not cut with a chainsaw?
Don’t Cut With a Dull Blade Cutting with a sharp blade actually extends the life of your chain saw. That’s because a sharp blade pulls itself into the wood, while a dull blade requires lots of downward pressure. That pressure wears out the bar, drive links, clutch sprocket and clutch.
Is it cheaper to mill your own wood?
In the end, only you can decide if milling lumber from your own property is worth it. Because every job is different, we can not tell you the actual amount of money you would save or not save. Generally, it costs 5-10% more to have your lumber milled on-site.
How much does it cost to have lumber milled?
By the Board Foot Pricing varies by species and location but ranges from $0.25 to $0.50 per board foot of sawn lumber.