Fueling a Chainsaw Use approved containers for transporting fuel to the saw. Shut off the saw or engage its chain brake when carrying the saw on rough or uneven terrain. Keep your hands on the saw’s handles, and maintain balance while operating the saw.
In order to avoid accidents and unnecessary strain, you should use the correct working techniques, the best possible safety equipment and a modern chainsaw with functioning safety features. Chainsaw safety requirements To achieve a safe working situation a modern chainsaw must be fitted with the following safety features. Remember to regularly inspect the safety features on the saw and always make sure you have a sharp and properly filed chain.
what is the chainsaw safety Related Question:
What is the safety tip on a chainsaw for?
A bumper spike is used to rest the chain saw on wood as you are cutting to prevent kickback, especially when performing a buck cut. An anti-kickback chain reduces the forces on the chain that cause kickback. A tip guard at the end of the chainsaw bar helps prevent kickback.
Is there a safety on a chainsaw?
There are several safety features you’ll commonly find on a homeowner-model saw. Some features below are available only on gas-powered saws: Chain Brake: designed to stop the chain if kickback occurs; available on many gas chainsaws, cordless chainsaws and corded chainsaws. Hand Guard: protects your hand from kickback.
Should you wear gloves when using a chainsaw?
Chainsaw gloves are very essential for using a chainsaw safely. Good cut resistance glove will protect you in case you accidentally hit your glove with the chainsaw. They will also keep your hands warm and protect your fingers against other hazards.
How does chainsaw kickback happen?
There are two circumstances that can cause kickback when using a chain saw. The first occurs when the moving chain at the tip or the nose of the guide bar strikes an object. The second situation is when the wood closes in, pinching the saw chain in the middle of the cut.
What is the most common chainsaw injury?
The most common hazards associated with chainsaws are injuries caused by kickback, pushback, and pull-in. Kickback is the most common and poses the greatest hazard. Kickback occurs when the rotating chain is stopped suddenly by contact with a more solid area throwing the saw rapidly backward toward the operator.
How common are chainsaw injuries?
According to the Centers for Disease Control and Prevention (CDC), approximately 36,000 people are injured by chainsaws annually. Medical costs for chainsaw injuries based on these facts amount to about 350 million dollars per year.
How do I keep my chainsaw from binding?
To stop your chainsaw from getting stuck, make a cut on top of the log or tree that’s preferably one-third of the log’s diameter. Use your chainsaw to cut from the underside until you meet the initial top cut. Always stand on the side when cross-cutting to prevent injury.
What safety equipment is needed for chainsaw?
The Occupational Safety and Health Administration (OSHA) requires that saw operators wear head protection, eye protection, hearing protection, chainsaw chaps or pants, and suitable footwear.
Do all chainsaws have a chain brake?
All chainsaws must have chain brakes that comply with ISO 6535:2008 Portable chain-saws — Chain brake performance.
What should you not do with a chainsaw?
Don’t Cut With Improper Blade Tension A overly loose or tight chain also wears out the drive sprocket and causes rapid chain and bar wear. To determine if your chain is properly tensioned, pull up on the chain. The drive links should still be in the bar groove. If the links come out of the bar, the chain is too loose.
Where do most chainsaw injuries occur?
Approximately 40 percent of all chainsaw accidents occur to the legs and well over 35 percent occur to the left hand and wrist.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
Should you flip your chainsaw bar?
Every chainsaw bar has been designed to be mounted right-side up or upside down. The reason for this is that it allows the user to extend the life of his chainsaw bar by 50%. Flipping the bar will give the heavily-used areas some relief from wear and tear.
How long should chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Can you cut with the top of a chainsaw?
While it’s designed to cut with either the top or bottom of the blade, just about anything that comes in contact with the top half of the end tip of the blade (known as the kickback zone) can change the cutting momentum and cause the saw to slam back against you.