Chainsaws can sometimes emit smoke for various reasons. Most chainsaws nowadays use the 1:50 oil/fuel mix, but always check your user manual to make sure as it can be different for some chainsaws. It covers the most common causes for a chainsaw overheating, and ways to prevent it from happening.
If your chainsaw is smoking from the engine, then your problem is more serious, and has potential to do greater damage to the machine. Alright, now that we’ve covered the 2 groups of things that DO cause chainsaw smoke, I also wanted to mention some things that DO NOT cause chainsaw smoke. The 2 things to look at, when troubleshooting a smoking chainsaw.
is a chainsaw supposed to smoke Related Question:
Why does my chain saw bar smoke?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
What to do if chainsaw is smoking?
An abundance of smoke emanating from the engine often indicates that an excessive amount of oil has been introduced into the oil and gasoline mixture that powers the chain saw. Ensure that you’re mixing the correct amount of oil and gasoline according to the dictates of your owner’s manual.
What happens when a chainsaw overheats?
The air filter will eventually get to a point where it will become so clogged that it won’t let fresh air pass through. At this point, the engine will stop working because it cannot run without air. This will make the chainsaw overheat due to the lack of cooling fresh air.
Why is my chainsaw burning the wood?
Your chainsaw burns wood because of poor lubrication Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.
Why is my chainsaw blowing white?
Why is my chainsaw blowing white? While black smoke is caused by the burning of more fuel than air, blue or white smoke is generally caused by the burning of excess oil.
Why does a chainsaw get hot?
Engine Maintenance The piston in a chainsaw’s engine moves rapidly to generate the cycles necessary to do the work that a chainsaw does, and the engine generates heat through both combustion and friction. It dissipates this heat through the exhaust port while drawing in cooler air through the intake port.
Why does my chainsaw not start when it’s hot?
When your chainsaw quits after it gets hot, you either have a problem with gas flow being restricted into the engine or with the spark. This is a common occurrence on older-model chainsaws. By replacing your spark plugs and keeping your gas lines clear you can reduce the chances of this problem recurring.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
How often should I flip my chainsaw bar?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.
How long should a chainsaw bar last?
Re: how long does a bar last The next, a Granberg, lasted about 2 months. About that time Stihl started using them with the same results. A good bar can be filed a few times on both sides and the tip replaced when needed. They could last almost as long as the saw.
Can you drill holes in chainsaw bar?
Re: Drilling a Chainsaw Bar Drilling that bar may not be as difficult as you think. It will be best if you use a drill press, start with a pilot hole, and then drill to the size you need. Make sure you have a sharp bit, run at the lowest speed you can, and use cutting fluid.
How long does a chainsaw stay sharp?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Can I use wd40 on my chainsaw?
We recommend using WD-40® Specialist® Fast Acting Degreaser and soak it for 10 to 15 minutes. Next, use a wire brush to remove all the grime (repeat several times) and wipe with a paper towel to make sure all the dirt is gone.
How do you start a stubborn chainsaw?
Try to start the chainsaw after priming the carburetor. 5. Activate the choke by moving the lever to the full choke position and pull the starter rope 3 or 4 times to start the engine. If that doesn’t work, move the choke lever to half choke and pull the starter rope, 6 times maximum, to start the engine.
How do you clean a chainsaw carburetor?
Let the chainsaw run at low RPMs/idle for a while. This is to let the cleaner run through the carburetor, the fuel lines, and the idle engine. The cleaner will wipe remove the gummy residue blocking the components to create a clean passageway for the air and fuel. As the RPMs begin to increase, turn down the idle knob.