Chain oil is applied to the bar and to each individual link in a saw’s chain via a special automatic lubricating mechanism inside the chainsaw. The best oil for a chainsaw chain is chainsaw bar and chain oil. No professional chainsaw supplier, technician, or operator will recommend using motor oil in place of actual chainsaw chain and bar oil.
Most high quality or professional chain saws have sophisticated chain oilers that are more efficient and have the capability of controlling the amount of oil being used. FERIC STUDY The Forest Engineering Research Institute of Canada tested and reported on field trials of a vegetable-based oil for lubricating chain saws. Rottne harvester operators noticed a significant reduction in the oil mist that collects on the machines windows due both to the cleanliness of the Binol compared to petroleum-based oil and to the reduced consumption of oil.
Fryer oil is different than straight off the shelf grocery veggie oil, it is formulated to take high heat for sustained periods. The ‘bio-oils’ out there have tack in them, commonly thought to enhance the performance of petroleum oil on a chainsaw bar and chain system, like it keeps the oil from flying off, or keeps it on the chain longer. I’ve been using straight vegetable oil in all my saws, now coming into my 5th year.
One of the most common points of confusion for new chainsaw users, is the difference between engine oil, and bar and chain oil. Bar and chain oil is a lubricant used to reduce friction caused by the metal-on-metal contact between a chainsaw’s bar and chain. There’s folks out there, that say regular old engine oil works great as a bar and chain oil.
is chainsaw oil toxic Related Question:
What is chainsaw oil made of?
Formula. Chainsaw bar oils are either petroleum-based or bio-based (formulated using vegetable oil). In the course of using a chainsaw, oil sling is inevitable.
What is the difference between chainsaw oil and motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
What is special about chainsaw oil?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the friction that occurs when metal rubs against metal. So, if you want to use the “correct” type of bar oil in your chainsaw, consult the manual and use what it suggests.
Is chainsaw bar oil biodegradable?
This environmentally conscious bar and chain oil delivers high performance that is highly biodegradable. Made from a vegetable oil base, STIHL BioPlus™ oil is the environmentally conscious way to keep your bar and chain lubricated.
Can I use 10w30 for chainsaw bar oil?
As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil. That’s because 10w30 oil has enough thickness and viscosity that will allow it to withstand the friction that is happening whenever you are using a chainsaw.
Can I use regular motor oil as my chainsaw bar oil?
If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can you use 2 stroke oil as chainsaw oil?
Can You Use 2 Cycle Oil As Bar Oil? You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.
Can I use vegetable oil instead of bar and chain oil?
Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.
Do you need bar and chain oil?
You want lubrication of the actual chain against the bar. You don’t want to chain to burn – which is what might happen if there’s too much friction. Without oil, it causes frictional force on the motor in the chainsaw as well.
What happens to a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
Can you use 10w40 in a chainsaw?
You can but it’s not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn’t fling off the chain as easily or poison your garden! 10w30. Thicker.
Can I use chainsaw bar oil in my lawn mower?
Got a two-stroke engine? Any two-stroke motor oil made for air-cooled engines, such those in chainsaws, water pumps and weed eaters, will work perfectly in your two-stroke lawn mower engine.
What kind of oil is chainsaw oil?
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
What kind of oil is Stihl bar oil?
Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .