Plus, from a safety perspective: if the chain is backwards all the cutters are facing you! Chain direction is not rocket science, but it’s very important for running a chainsaw effectively. Follow these 4 steps to get your chainsaw chain headed in the right direction. If any of this chain component terminology is unclear to you, or if you’re just interested to learn more, check out this in-depth explanation of the anatomy of a chainsaw chain.
Getting the chainsaw chain direction right is very straightforward. In the chainsaw chain direction picture below, the Husqvarna 450 powerhead is on the right and the tip on the left. You can also see the chain direction when looking at the bottom of the bar, facing back toward the powerhead. Hopefully, that makes things clear and you won’t end up with a chainsaw chain on backward!
The most terrible thing which can happen to you is when you put in your chainsaw chain in the wrong direction and begin your task, only for the chainsaw to get blocked in the middle of the project. The direction of the chainsaw blade is always the same regardless of the type or model of chainsaw. “The size of the pitch depends greatly on the type of chainsaw you are using. If your chainsaw is one for heavy duties, then you will have a large pitch. The pitch of a chainsaw is basically the distance between any two repeated chain links divided by 2, that is, the average distance between two successive chain links. So, before purchasing a new chain, make sure it fits the exact pitch so as to avoid ineffectiveness. There are some chainsaw pitches that are most commonly used. They include ΒΌ”, 0.325″, 3/8″, 3/8″ low profile and 0.404″.
Putting a chain on a chainsaw the right way is a rather important step in properly using your chainsaw. The easiest way to replace or correct a chain on a chainsaw after you’ve taken the machine apart is to start by reattaching the chain bar to the body of the chainsaw. Again, if the blades of the chain are not facing the correct way, you will think the blade is dull because it is cutting in the wrong direction.
how to do chainsaw art Related Question:
What kind of wood is best for chainsaw carving?
Softwoods work best with chainsaws and carvings because of way they yield to creative impulses with little kickback, though their knots can be tricky to maneuver at times. Softwood give a fantastic finished product. Some of the woods that fall into this category are Pine, Cottonwood, Redwood and Ponderosa.
How much do chainsaw carvers make?
The salaries of Wood Carvers in the US range from $18,800 to $50,720 , with a median salary of $28,990 . The middle 50% of Wood Carvers makes between $28,990 and $29,630, with the top 83% making $50,720.
How long do tree carvings last?
Wood carvings can last anywhere between a few decades to several lifetimes or more depending on how they were treated and where they are stored. They can easily last several decades outside if out of direct sunlight and are regularly treated and sealed. They can last almost indefinitely indoors and the wood sealed.
Can you use pine for chainsaw carving?
Pine can be carved but there are a few things to look out for. A Clean piece of White Pine is generally best for carving. It is also very easy to machine and one of the best woods for chainsaw carving.
Is Red Oak good for chainsaw carving?
Yes, Oak is good for carving. Oak is a popular ideal wood for carving because of its great properties. Because of being strong and sturdy Oak wood carvings has long-term durability. But carving with oak is not simple as carving with basswood or pine due to various factors.
How much does it cost to get a tree carved?
Prices vary, depending on the amount of detail, type of wood, diameter of log, height of tree, location, degree of difficulty, etc. As a rule of thumb, prices are generally $150-$250 per foot of carving up to a height of 5 feet. Above 5 feet, scaffolding is needed, and the price is about $200-$300 per foot of carving.
How do you preserve a chainsaw carving?
To preserve your chainsaw carving for as long as possible you must seal it with an oil such as the danish oil or decking oil. Apply multiple coats of the sealer with daily intervals between each coat. Reapply the sealer regularly during the first year, and only once per year after the first 12 months.
How do you chainsaw an owl?
To carve an owl out of wood, start by stripping the bark and sapwood so your owl is made from the strongest part of the trunk. Next, plan and mark the shape of your owl. The chainsaw work starts with rough blocking out, then refining, and finally the adding of key details with a light touch.
Is chainsaw art hard?
It can even become a career since many people make a living out of it. Although chainsaw carving may seem hard and nearly impossible at first, anyone can start. It’s important to always remember that a chainsaw is potentially an extremely dangerous tool that must be handled with care.
How much should I sell wood carvings for?
However, as a general rule, if you’re just starting out as a woodcarver, you should charge about $1.50 per square inch. More experienced carvers can change significantly more, with prices reaching $2.50 per square inch and above.
Can wood carving be a job?
Wood carving carpenters may earn a diploma, certificate or an associate’s degree in carpentry, fine woodworking or wood technology, with certificate programs in wood carving available at individual schools. In general, three years of on-the-job training are usually required for full technical proficiency.
Is wood carving difficult?
Anyone can learn how to carve wood, although it takes a lot of patience and time, this is something that comes with experience and not talent, therefore wood carving is difficult to master but anyone can do it.
What is easy to carve?
The Easiest Wood To Carve- Basswood The most popular and universally used wood for carving is Basswood. The softness of Basswood is enough to make carving fairly easy, while emphasizing the fine details well thanks to the small grain knots.
Does carving a tree harm it?
Depending on how deep the cut is, it may disrupt the cells below the bark, phloem and xylem, that are responsible for transporting water, sugar, and other nutrients throughout the tree. In extreme cases, carving or other bark damage can cause the tree to starve to death due to this cellular disruption.
Does carving initials in a tree hurt it?
In fact, carving letters into a tree probably won’t hurt it. That kind of engraving (quite unlike stripping a tree of its bark: that will kill it!) rarely goes deep enough to do any serious damage to the integrity of the tree itself.