Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
Choosing the best chainsaw for milling your own lumber will really come down to how large of trees you’ll be working with. If you’re clicking on links that take you to a big box lumber store or Amazon, then you’re not going to be buying a chainsaw capable of milling lumber. Almost anyone who has spent a decent amount of time milling their own logs will quickly tell you that this is the saw you should go with from day one if you’ll be milling with any consistency.
Ripping chain has a zero angle degree cutting face on the top plate and introduces narrow scoring cutters before the clearing cutters. The Alaskan Mill can be used for all of the cuts in various ways; Lower the mill and make a second parallel cut, then roll the log 90 degrees and make a third cut, thus giving you a three sided cant. If your mill is not wide enough to make the second cut as described, the log can be progressively rolled and the sides removed to reduce the diameter, so that the mill can fit across the log.
“Then we see which log size can you mill with each cc saw and finish by analyzing what exactly makes chainsaw milling so power-intensive.Saw CC. vs. Log diameter. SAW CC. vs. LOG SIZE Engine size Log diameter Log diameter 50cc <20" <12″ 60cc <32" <16" 90cc <52" <32″ 120cc <7078" >32″. The Alaskan mill is a simple metal frame, which attaches to the chainsaw bar and can be adjusted to change the depth of cut. If you didn’t own a chainsaw and decided that you wanted to cut some lumber, you could be making your own lumber for about $500, for a small chainsaw and the Alaskan mill attachment.
We have the best chainsaw for alaskan mill right here in our article. Any size of chainsaw will work on the Alaskan mill but you have ensured that they are at least more than 5 inches. At the end of the day, it’s really up to you, and what you want to call the best chainsaw for Alaskan mill.
“I’m thinking about getting at least a 36” Alaskan mill so we can harvest hard to get to trees or difficult to move ones or larger than my buddy’s Cooks bandsaw mill will handle. Lucas mills are a manual mill that are great for difficult locations/very large-heavy logs( just mill them in place). Heck, with a couple of helpers you can even carry the mill a short distance, remembering you need to carry everything you saw back to the transport…. You do loose out on board width, everything come of the mill dimensioned.
what size chainsaw do i need for an alaskan mill Related Question:
What saw to use with Alaskan sawmill?
For using an Alaskan mill, we recommend the Echo CS-590-20. It’s got a translucent fuel tank that makes it easy to tell when the powerful 59.8cc two-stroke motor is low on fuel.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
What size chainsaw do tree trimmers use?
The general guideline that most operators agree on is that a chainsaw should have a bar length 2 to 3 inches longer than the diameter of the tree or limb you wish to cut. To cut a 10-inch tree in one pass, you will need to use a 12-inch bar.
How do I choose a chainsaw size?
The usual guideline is to choose a chainsaw with a bar that is two inches longer than the diameter of what you need to cut. For example, if you need to cut a tree that is 10” across, you will need a chainsaw of 12”.
How fast does a chainsaw mill cut?
Cutting speeds can vary from 8 feet a minute in narrow softwoods, to 1-1/2 feet a minute in wide hardwoods.
Are chainsaw mills worth it?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
Can you mill with a 60cc chainsaw?
Re: Husqvarna ChainSaws A 24″ bar is too much for a 60cc saw crosscutting, never mind ripping. Torque and lots of it is required for milling, even with that it is still hard work for the operator and the saw.
Can you mill with a 50cc chainsaw?
Re: Need Advice Concerning the Alaskan Chainsaw Mill The short answer is Yes.. you can do it with a 50cc saw but you will kill it pretty fast.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
How big of a tree can a 16 chainsaw cut?
16 chainsaw would cut through a 14″ tree diameter. 10 inch chainsaw for 8″ in diameter. 6 inch chainsaw can cut a 4″ diameter.
What is a 14 inch chainsaw good for?
In chainsaw descriptions, the term “light use” covers pruning trees and shrubs, and general maintenance. Light-use chainsaws’ cutting bar typically is under 14 inches long. Pruning ornamental trees and shrubs that don’t have thick branches is simple with these novice-friendly models.
Is Echo as good as STIHL?
Conclusion. Echo and Stihl are both options. If you want a powerful and lightweight chainsaw, then an Echo model might be the right choice for you. Stihl makes more sense if you are after a well-built, durable, full of extra features, fuel-efficient chainsaw.
Can electric chainsaw cut trees?
Although electric chainsaws are smaller and easier to carry, most lack the power and stamina to cut down large trees. If you have big trees on your property that you want to remove or cut into firewood, a gas model is your best bet. Electric chainsaws come in two types: corded and battery-powered.
How many cc chainsaw do I need?
Your work will determine the type of chainsaw you purchase. Heavy work: If the task requires long hours felling trees, consider a professional chainsaw powered with a 65 to 110 cc engine and a guide bar of 16 to 20 inches. Moderate work: Cutting logs for firewood only needs a 55 cc engine with a 16 inch guide bar.
What is a chainsaw ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.