There’s no doubt that both the reciprocating saw and the chainsaw are capable when it comes to cutting up wood with ease. A reciprocating saw will usually only cost you between $80 and $200. On the other hand, even a cheap chainsaw will often come with a $180 or higher price tag. At first glance, you might assume that a reciprocating saw and a chainsaw are suitable for completing similar cutting tasks.
The chainsaw is a lot more work to maintain than the reciprocating saw. As with a chainsaw the reciprocating saw needs to be sharpened, as using it on trees can dull the blades. If it’s a thin tree you need to cut, or if you need to cut off branches from time to time, then pick up the smaller, lighter reciprocating saw.
Maintaining the electric chainsaw is more complicated than the reciprocating saw. The simplicity of the reciprocating saw allows for just sharpening but on the other hand, the electric chainsaw requires regular maintenance-the change of oil, sharpening of the blade, cleaning of the bar, etc. Below, we give you a full breakdown of the advantages the reciprocating saw has over the electric saw.
I have some small trees that I already cut down by hand but I want to cut into logs and a power tool will be much faster. I’m debating between buying a sawzall, which will be versatile for other uses, or buying an electric chainsaw. The biggest trunk was maybe 8 inchs thick at very most.
sawzall vs chainsaw trees Related Question:
Can you use a Sawzall to cut trees?
Can You Use a Reciprocating Saw to Cut Trees? Generally speaking, the answer here is… yes, you absolutely can use a reciprocating saw to cut trees. In fact, the rapid push-and-pull action of this kind of saw, combined with its saw tooth blades, allows it to efficiently work through modest amounts of green wood.
Can you use a Sawzall as a chainsaw?
If you already have a sawzall or equivalent, it’s worth buying some coarse-tooth blades. It is handy for a quick cut of a limb or two if they’re not too big, but it is far from being as good for the job as a chainsaw. A sawzall is handier than a chainsaw for some small jobs like pruning large bushes.
Can you use a Sawzall to cut tree roots?
You can use a reciprocating saw to slice through roots if you are trying to dig out an old tree or shrub. The saw will even be sharp enough to cut through the soil, if your soil is not rocky.
Can you cut logs with reciprocating saw?
A reciprocating saw is perfect to split your firewood. It is a kit that you need to cut the firewood. Moreover, these tools are immensely powerful for cutting through several materials. It makes your work done very effectively.
What is the best tool for cutting tree branches?
A chainsaw provides the cleanest cut when you’re dealing with limbs thicker than 3 inches. If your pruning job requires a chainsaw, it’s recommended that you contact a certified arborist. A pole pruner allows you to cut branches that are beyond your reach. Most pole pruners cut limbs up to 2 inches in diameter.
Are reciprocating saws safer than chainsaws?
What is this? While the electric chainsaw is perfect for cutting bigger trees, the reciprocating saws are ideal for smaller trees. Reciprocating saws are, however, less risky to handle as the power goes off immediately you remove your hands from the power button.
What’s better than a chainsaw?
A bow saw can handle many of the same cuts while saving wear and tear on a chain saw. Bow saws are capable of handling up to about a 10- to 12-inch tree, and replaceable blades mean that there’s nothing to sharpen. Look for a minimum 24-inch blade—smaller ones are suitable only for small branches—or even 30-inch.
What is the difference between Sawzall and reciprocating saw?
sawzall, and what the difference is between the two. They are actually the same thing. The Milwaukee tool company introduced the first reciprocating saw in 1951, and called it the Sawzall. It has since been so widely copied that the terms reciprocating saw and sawzall are now used interchangeably.
Can you use a chainsaw to cut tree roots?
Once you’ve sliced the stump almost all the way to the ground, continue cutting it — and the soil — diagonally and at different angles. Don’t go more than a foot into the soil. Chainsaws are powerful machines, and you don’t have to worry about dirt damaging it or knocking the chain off.
What is the best way to remove tree roots?
Dig around the stump, exposing as many roots as possible. Use a chainsaw, hatchet, or handsaw to cut the larger roots. As you continue digging, you may find smaller roots that can be cut with clippers or loppers. Once you’ve cut all of the roots around the stump, lift and remove the stump from the ground.
How do you cut thick tree roots?
Try to cut far from the root ball. Next, use the grub hoe to lift out the cut roots. Pull additional ones out by hand if you can. Push the stump back and forth to loosen the roots and continue to cut and pull roots until you are able to remove the root ball from the soil.
Will a reciprocating saw cut sleepers?
We would not recommend cutting sleepers with a reciprocating saw or chainsaw. A reciprocating saw will produce wavy cuts, while a chain saw is messy, inaccurate and dangerous to use for an inexperienced user.
What is a Sawzall good for?
It’s the go-to tool for remodeling and demolition. With a recip saw (also called a Sawzall, the brand name of Milwaukee’s tool), you can cut through lumber even if it’s embedded with nails. It can also cut all common forms of metal: steel, aluminum, copper, and cast iron.
What is the best saw choice for cutting and pruning trees?
Curved or straight: A pruning saw with a straight blade is well suited for making cuts in the vicinity of the user’s torso or waist because that’s where the user is able to generate the most power. Curved blades are better suited to making overhead or low cuts because the curved blade helps hold the saw in place.
Which tool is used to cut trees?
1. Pruning shears (or pruners, clippers or secateurs) These are probably the most-used tool when it comes to pruning shrubs, flowers, vines, and small growth on trees. Pruning shears are hand-held and can cut branches and twigs up to ¾ of an inch thick.