Loggers usually have their own preferences when making firewood and are faithful to a specific type of firewood processor they are used to having; a chain saw machine or a circular saw machine. Key benefits of a circular saw processor The circular saw blades are fast, maintenance-free and generate a small amount of sawdust. Key benefits of a chainsaw processor The chain saw offers a greater cutting diameter compared with the hard-metal blade machines in the same size category.
Unlike a chainsaw with its long arm and chain, a circular saw features a circular metal blade with sharp teeth for cutting. A chainsaw is generally intended for making bigger and rougher cuts, whereas a circular saw is intended for much smaller and finer cuts and a cleaner finish. A chainsaw can be considered a lumber-working tool, whereas a circular saw is a carpentry tool.
These types of saws can cut nearly any type of wood using blades with a TPI between 8 and 10. While the most common blade diameter for circular saws is 7¼ inches, you can find saws with blades as small as 4 inches for light woodworking projects or a large as 12 inches for cutting heavy timbers. While all miter saws make angled cuts, a compound miter saw has the ability to tilt on its axis to make slanted cuts in addition to angled cuts.
chainsaw or circular saw Related Question:
Can I use a circular saw to cut a tree?
While its possible to use a circular saw to cut a tree branch I wouldn’t advise it. They’re not meant for trimming trees and because of that, I won’t be adding it to list. Same goes for the other saws designed for something other than cutting trees.
Do carpenters use chainsaws?
Re: Carpentry and Chainsaws I’ll use a chainsaw for cutting off the top of posts (fence, building, etc), notching them for plates, etc. Also use a sliding compound miter a lot or a battery operated circular saw.
Can you cut accurately with circular saw?
Using a Straightedge for Accurate Circular Saw Cuts Measure the exact distance from the edge of the circular saw’s shoe to the same side of the blade. Once you have that measurement, add it to your original marks and make a new line. Set the straightedge on the new marks, clamp it down, and make your cut.
What saw for cutting tree?
Types of Tree Cutting saws Bow Saw. Hand Saw. Chainsaw. Reciprocating Saw.
What is a worm drive saw?
What is a Worm drive saw? A worm drive saw has the motor attached at the rear. This is very powerful and its power is driven through two gears each set at 90 degrees. This setting implies that the engine produces more torque but less Rotation Per Minute (RPM) of about 4,500.
What is a beam saw?
What Are Beam Saws? These saws have a large blade used to cut different sized logs into beams. Often using circular blades which are available in a variety of different styles, beam saws are useful for a range of different jobs.
Can you cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
How thin can you cut with circular saw?
And now if you want to make another repetitive cut, you can do it easily without adjusting the pliers or the saw itself. Now when you have the pliers clamped on this side of the shoe—on the blade side—you can typically cut up to about one and a half to two inches.
What is the minimum cut with a circular saw?
The circular saw can cut any depth from 0 to about 2 3/8″. This is awesome. But, to get the best quality cut and reduce the possibility of kickback, you’ll want to set the proper cut depth for your material. The blade should only project about 1/4 -1/2″ below the bottom of the material.
Do I need a miter saw if I have a circular saw?
Why a Miter Saw Should Probably Be Your First Saw. Circular saws do have more versatility than miter saws. Every cut you can make on a miter saw can also be done on a circular saw, plus a few more. This is why my dad (and some others on the internet) recommend starting with a circular saw.
What is the space between two protruding teeth on a saw blade called?
Gullet (handsaw) The space between a saw’s teeth, where the saw dust is carried out.
What do you use to cut thick tree branches?
A chainsaw provides the cleanest cut when you’re dealing with limbs thicker than 3 inches. If your pruning job requires a chainsaw, it’s recommended that you contact a certified arborist. A pole pruner allows you to cut branches that are beyond your reach. Most pole pruners cut limbs up to 2 inches in diameter.
What size chainsaw do I need to cut firewood?
Many homeowners find that a 14- to 16-inch chainsaw is a good length for them. That’s long enough to limb-up trees, cut down small trees, and cut most firewood, but it’s also short enough that it’s easy to control the saw.
Are worm drive saws more powerful?
Advantages of a Worm Drive Circular Saw A worm drive also has larger gear teeth with more load-carrying capacity than a direct drive, which provides more power but also adds weight.
What’s the advantage of a worm drive saw?
Longer lasting, great sightlines for many users, more torque, accuracy and power – these are top advantages of the worm-drive power saw. The main drawback is the weight issue.