All chain saw service, other than items in the Owner’s Manual maintenance instructions, should be performed by competent chain saw service personnel. Operating with a drooping chain is damaging to the chain, bar and engine. “Hold chain in your fingers without discomfort while counting to 20, the chain is too h o t to adjust accurately. If you try to adjust an overheated chain, you will fail because thechain will becontracting rapidly as you proceed. Let thechain cool to where you can hold it comfortably before making the adjustment. b) A warm chain should not be adjusted to the same tension as a cold chain. When chain is warm adjust to where the clearance between the tie-straps and bar rails at bottom, center of bar is about 1/8” or to half the depth of the tangs.
I bought a carb rebulid kit for the carb and a new plug. Took the carb out, disassembled, cleaned, blew out the passages, put the new rebuild kit in, installed carb, installed engine unit into frame, put new plug in, and then tried to start it. I take the plug out and ground it and it does spark when I pull the ripcord.
how to start homelite xl chainsaw Related Question:
How old is a Homelite XL-12 chainsaw?
The year 1963 saw the introduction of the world’s first “lightweight” chainsaw, the magnesium-alloy framed Homelite XL-12; the numeral twelve denoting that the power-head weighed a mere twelve pounds. This saw is widely regarded as one of the most recognizable and well-known chainsaws of all time.
What’s the fuel mixture for a Homelite XL chainsaw?
The Perfect Recipe The recommended 50-to-1 fuel mixture includes 2.6 ounces of a high-quality, two-cycle oil with added fuel stabilizers and 1 gallon of unleaded 87-octane gas. Homelite recommends using their brand of oils, specifically designed to work in any model with a 50-to-1 fuel ratio.
What size motor is on the Homelite Super XL?
General Specs The Super XL AO is equipped with a single-cylinder, two-cycle engine with a displacement of 3.55 cubic inches.
How many cc’s is a Homelite XL-12 chainsaw?
DISPLACEMENT ● 3.3 cubic inch. STROKE 1%”.
How many cc’s is a Homelite Super XL?
The engine in the Homelite XL Chain Saw displaces 58.2 cc and has one cylinder. The bore is 1.8 inches and the stroke is 1.4 inches.
What type of oil do you put in a Homelite chainsaw?
The ideal oil for a Super 2 chain is Homelite Bar and Chain Oil. Clean SAE 30 oil can also be used to lubricate the chain, according to Homelite.
What type of gas does a Homelite?
Homelite blowers are designed for unleaded automotive gasoline with an octane rating of at least 87.
Do they still make Homelite?
Do they still make Homelite chainsaws? Yes, Techtronic Industries acquired rights to the Homelite brand from John Deere in 2001 and has continued producing light duty electric chainsaw models for the home consumer market.
How many cc’s is a Homelite 360 chainsaw?
The engine in the Homelite 360 chainsaw is large enough to cut through softwood trees, like pine and cedar. The 360’s capacity size is 3.5 cubic inches, which means that it isn’t suited for larger hardwoods.
How many cc is a Homelite 330 chainsaw?
AWAY better saw . Same size basicly but way more reliable and it will cut almost twice as fast for the same weight saw. Easy to fix when you need to and better balanced., more power. 58 cc through bred.
Where is the model number located on a Homelite chainsaw?
Homelite Model and Serial Number Locations Homelite chainsaws typically have the model number plate located on the rear handle.
Are Homelite chainsaws any good?
The Homelite brand has a reputation for delivering affordable, functional tools with average homeowners in mind. This is on full display with the Homelite UT43122B electric chainsaw. It’s a good choice for occasional use and can handle pretty much any cutting job that’s likely to pop up around the yard.
How do you adjust the carburetor on a Homelite XL chainsaw?
Adjust the Homelite chainsaw carburetor by turning the high- and low-speed screws as needed. Set the high speed screw by adjusting the screw marked “H.” Pull the trigger so that the throttle opens as wide as possible. Turn the screw to the left and note the engine performance.
Are Homelite and Ryobi the same company?
Yes Ryobi and Homelite are both currently owned and manufactured by the same company – TTI (TechTronics Industries) if the part number your machine uses is the same, the part is the same.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Most gas chain saws require a premixed gas-and-oil fuel to operate properly. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated.