When cross cutting (against the grain of the wood) a dull chainsaw chain creates fine sawdust instead of coarse strands. The saw is producing smoke even when your chain is oiled and the chain tension is correct. The chainsaw produces an uneven cut. This could mean that your chain has dull cutting teeth on one side.
If you notice these signs while working with your chainsaw, it is time to sharpen or possibly replace the saw chain. While doing a split cut or a cross cut the saw chain creates fine sawdust instead of coarse strands. There are many good videos online that will help you sharpen your chain and help you use the service marks on the chain.
Here are a few signs on how to tell if a chainsaw chain is sharp. If the chain of the chainsaw hits soil, ice, or rocks multiple times, then it’s probably time to change and replace your chainsaw chain. If the chain passes those lines, there’s a risk of the chain breaking into separate pieces or even the chain flying off while using.
what does a dull chainsaw blade look like Related Question:
Which chainsaw blade is dull?
The chainsaw runs in one direction causing a crooked cut. This is an indication of dull cutting teeth on one side of the chain or uneven cutting teeth lengths. The chainsaw “rattles” and “bounces” during the cut. It is difficult to achieve precise positioning.
How do you tell when a chainsaw chain is worn out?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Why does my chainsaw blade go dull so fast?
Is the wood that you’re cutting with the chainsaw particularly dirty? Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast.
Will burnt wood dull a chainsaw?
Cutting burned trees is extremely demanding on a chain saw. It is very abrasive and fine particles. Check the air filter often. It will need cleaning or replacing on a regular basis.
How many times can a chainsaw blade be sharpened?
Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape. If you use the same chain for a few years, then buy a new one, the new one won’t mesh smoothly with the sprocket and bar.
Is it worth sharpening a chainsaw chain?
Sharpening your chainsaw chain is definitely worth it as a sharp chainsaw chain is easier to work with. It takes less effort to cut through wood and your chain will make cleaner cuts with sharp blades. A chainsaw chain can be sharpened multiple times without much of a cost.
How often should a chainsaw chain be sharpened?
A chainsaw may only need to be sharpened once a year if it is rarely used, but a tool that is frequently used will need to be sharpened regularly to ensure that the blade doesn’t get too dull. On average, a chainsaw blade will retain its sharpness for about 3 hours of actively cutting through wood.
Will wet wood dull a chainsaw?
Does Cutting Wet Wood Dull a Chainsaw? Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. True, it is not wet with water.
Does hard wood dull a chainsaw?
Re: Chainsaw and oak Very hard but really puts out the heat in the fireplace. If you cut it green it is not too bad. After it has dried it will dull a chain about each tank of gas. And that was Stihl chain.
Will dirt dull a chainsaw blade?
Nobody plans to run their chain saw into dirt. But when you cut close to the ground, you’re just begging for a quick dip into dirt, rocks and crud. All it takes is a second in the dirt to dull the cutters. In addition to dulling the cutters, dirt also wears out the chain links faster, causing the chain to stretch.
How long should a chainsaw blade last?
The lifetime of a chainsaw chain has no fixed limit and depends on usage and maintenance. The chain should last many years; 5-6 years should be no problem. However, if the chainsaw chain is used properly and taken care of, it can last way longer.
Why is my chainsaw bar smoking?
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Why does a chainsaw cut crooked?
One major reason a chainsaw curves to either the right or left during a cut is that it was unevenly sharpened. The unequal teeth of the chain cause it to take a different-sized bite into the wood. What is this? The uneven sharpness of the chain is mainly due to manual sharpening, especially with the use of a file.
How much does it cost to sharpen chainsaw chain?
A typical chainsaw can be sharpened up to 10 times before it’s time for a replacement. The cost to have a chainsaw sharpened ranges from $13 to $16. The average cost per chainsaw sharpening is $14.50 for people who choose to have their chainsaws professionally sharpened.
How often should you flip the bar on a chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.