The piston ring speed on the average chainsaw travels 2,500 surface feet per minute. A chain slides across the surface of the sawbar rail at around 5000 feet per minute. The chain is moving at 55 to 60 m.p.h. or a mile per minute ( 88 feet per second ).
Multiply the above number by the number of teeth of the saw sprocket. Multiply that number by the saw R.P.M.The final answer will be the chain speed in inches per minute, just divide by 12 to convert to feet per minute.
If you have a lot of work for your chainsaw, it is good to know how long you can run your machine before you have to add gas or change/charge the battery. STIHL claims a forty-five-minute runtime with a chainsaw and battery, but it is hard to equate what runtime minutes mean with a chainsaw. If you want to store your chainsaw for a long time and find it seeping oil for many days, then the problem is with the vacuum relief valve.
To help you check what chain speeds are you probably running at, I programmed a simple chain speed calculator below. The chain speed calculator takes chain pitch, drive sprocket tooth count and engine RPM as input. Chainsaw chain speed varies with engine speed – there is no single chain speed spec for a given chainsaw model.
Test rpm from 10,000 to 14,000, whether your saw is powered by a single charge or a combination. You need to determine what maximum speed your saw can reach before you determine its test speed. This is because that’s only an example of a broad difference.
how fast does a chainsaw run Related Question:
How fast does a chainsaw spin RPM?
Depending on your saw, the reading should be between 10,000 and 14,000 rpm. That’s a wide variation, and so it’s important to look up the maximum speed of your saw before conducting this test. The engine should never run faster than the maximum speed at which it is designed to run.
What is the highest RPM chainsaw?
What Chainsaw Has The Highest Rpm? Due to its performance and maximum rpm (14,000 rpm), STIHL’s MS 400 C-M chainsaw is perfect for forestry and arb professionals.
What is the fastest cutting chainsaw?
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available.
How fast is a Stihl saw?
The chain saw has a massive 4 ft long guide bar and a 120cc engine that throws out 8.7HP. This huge saw weighs less than 10 kilos, so its power-to-weight ratio is better than some top performance road bikes. At full speed a STIHL chain saw chain makes a cut in the wood over 500 times per second.
How do you measure the speed of a chainsaw chain?
Formula for Chain Speed Calculation Take chain pitch and multiply x two. Multiply above number by number of teeth on sprocket of saw. Multiply that number by saw RPM. The number you get will be chain speed in inches per minute.
Does a skip tooth chain cut faster?
A skip chain has fewer cutting teeth than a conventional chain which means it won’t be dragging as many teeth through the wood you’re cutting. Less drag on the chain means less power is needed to cut through the log. That means the motor on your saw runs faster which keeps it in a more efficient power curve.
Why does my chainsaw chain get dull so fast?
Dirt Causes A Chainsaw To Dull If you’re cutting through logs and your angle of approach is too steep, a simple cut through could nick dirt or even worse, rocks on the floor causing your chainsaw to jerk, thus dulling.
Does a ripping chain cut faster?
Ripping chains are slower as the finer cut and surface takes more time than regular cutting.
What’s the biggest chainsaw Stihl makes?
The largest and most powerful chainsaw in the STIHL lineup. For the largest, toughest and most demanding jobs, professionals can find the performance they need in the MS 881 chainsaw. With its updated engine design and up to 41” guide bar length, the MS 881 is the largest, most powerful saw in the STIHL lineup.
What chainsaw do loggers use?
Stihl is the most popular chainsaw for professional loggers. It has a long-lasting chain, and you can also enjoy the exceptional cutting speeds available with this brand of chainsaw. Additionally, the chains are high-performance, low vibration, and quiet in their performance.
Can a chainsaw cut through bone?
Bones may be slightly tougher, but they are rigid and a chainsaw will likely be able to cut through them without much problem – though it will probably dull the blade more than wood.
What is a ripping chain?
Ripping chain is chainsaw chain designed specifically for cutting with the grain. Ripping chain is always micro chisel or semi chisel chain which features a re configured cutting angle of 10 degrees.
What does full chisel chainsaw chain mean?
Full chisel, semi-chisel, chipper The sharp corner of the full chisel cutters split wood fibers easily and provides the fastest, most efficient cutting in clean softwood. The corner of the cutters on a semi-chisel saw chain are slightly rounded.
Do I need a ripping chain?
Do I Need A Ripping Chain? If you are milling and want to have a smooth finish to your cuts, then a Ripping chain provides a huge advantage over a regular x-cutting chain. You should also get some speed advantages in using a Ripping chain.
How often should you flip the bar on your chainsaw?
Some professional loggers would advocate that you should flip your chainsaw bar at the end of every use, particularly when you are cleaning up. Others suggest a more relaxed approach advising that you flip the chainsaw bar only when you are changing your chainsaw blade.