If you do not need a large-scale sawmill, there’s absolutely no need to spend more money on one and you would be better off with a chainsaw mill. In order for you to be able to fit your chainsaw into the sawmill, it must be compatible or else it won’t fit. Before you proceed with purchasing a sawmill, you need to make sure that your chainsaw and the sawmill are actually compatible, unless you plan on purchasing an additional chainsaw.
Recently at least one slab milling operation in Victoria was efficiently turning out some highly usable sections of messmate as shown above, as well as the slabs of an exotic species shown below. In fact most of us could see the figured sections of wood shown at the end of the video working their way into higher end projects. With a slabbing rig like this all that’s left to do is dream of what you could make with all that wood.
If you are in a hurry and just want to find out what the best chainsaw mill is, then we recommend the Granberg ChainSaw Mill G777 as the best one. Finally, you need to find the best chainsaw mills for the money that is compatible with the type of chainsaw you own. Heavier chainsaw mills do not make the best portable chainsaw mill, so if you cut logs deep in the woods, a lightweight mill will be a better choice.
Despite these concerns, it is still a highly useful piece of gear that will allow you to mill your own wood using your chainsaw. This convenient chainsaw mill is a lightweight and portable piece of kit that will give you the flexibility to cut trees into boards wherever you need to work. Here we have one more affordable chainsaw mill that will allow you to convert your chainsaw into a machine that accurately produces boards, planks and more.
chainsaw mill reviews australia Related Question:
Is chainsaw mill any good?
A chainsaw mill is one of the most efficient and effective tools when it comes to converting wood into lumber. Lumber is a very effective raw material that can be used for a variety of purposes. Be it for firewood or be it for construction purposes, you can certainly utilize lumber for whatever you need.
What size chainsaw do I need for an Alaskan mill?
Most Alaskan mills require at least 3 inches extra at the end of the bar for attachment. I also recommend going with a saw with an engine size of at least 60cc for smaller logs and softer woods. A minimum of 90cc would be best though.
Do chainsaw sawmills work?
A chainsaw has a saw kerf right around 3/8 of an inch, which means it is very inefficient and produces a lot of sawdust. For these reasons, a chainsaw mill is definitely not to be used for optimizing the amount of lumber that you can yield from a log.
Is milling wood worth it?
Milling your own lumber can produce quality material for a fraction of the price of a lumber dealer. In fact, if you purchase your own mill, like I have, you can actually make a profit off of it by selling lumber to other woodworkers and by offering to mill other people’s logs.
What is a chainsaw mill used for?
A chainsaw mill or PortaMill or Alaskan mill or Alaskan sawmill or Logosol sawmill is a type of sawmill incorporating a chainsaw, that is used by one or two operators to mill logs into lumber for use in furniture, construction and other uses.
How long does it take to chainsaw mill?
In the world of chainsaw milling, the more powerful the saw the better. You can mill with a smaller saw; however, it’s going to be really slow. On average, it takes me about 10-15 minutes to make one cut using my saw, based on the size logs that I typically cut. Expect that a smaller saw will cut slower.
How long does it take to mill a log with a chainsaw?
Milling logs with a chainsaw mill isn’t a quick job. While the length of time it takes depends on the power of your chainsaw, your own skill level, and the size of the log you are cutting, as a rough guideline, it will take anywhere between 10 and 25 minutes to make each full cut.
How thin can you cut with a chainsaw mill?
The Alaskan Mill Mark III Attachment can cut boards as thin as 1/2″ and as thick as 13″. Setup and make your first cut, remove this first slab, then use the Mini-Mill II to edge the log.
What CC is Alaskan mill?
In general, you will need at least 50cc to run our smallest mill (G777). The more powerful your saw, the easier your milling experience is going to be.
Can you mill with a 60cc chainsaw?
Re: Husqvarna ChainSaws A 24″ bar is too much for a 60cc saw crosscutting, never mind ripping. Torque and lots of it is required for milling, even with that it is still hard work for the operator and the saw.
Are chainsaw mills safe?
Re: chainsaw mill safety Be careful using the mini mill down in front of your leg because if the chain breaks you`ll be chain whipped if your bar isn`t buried in the log. Wear eye protection along with the face shield. Make sure the logs are secure before milling them.
How long should logs dry before sawing?
Re: drying logs before milling A question often asked. I tell them at least 10 to 15 seconds.
Is it cheaper to mill your own wood?
In the end, only you can decide if milling lumber from your own property is worth it. Because every job is different, we can not tell you the actual amount of money you would save or not save. Generally, it costs 5-10% more to have your lumber milled on-site.
What is the going rate for milling wood?
Pricing varies by species and location but ranges from $0.25 to $0.50 per board foot of sawn lumber.
How do you tell if a chain is a ripping chain?
There are often two distinct features on a ripping chainsaw chain over a standard cross-cut chain. Ripping chains are semi-chisel or micro-chisel with a low cutting angle between 5-10 degrees or each cutter, opposed to the deeper cutting angle on a regular crosscut chain of around 25-35 degrees.