“I need a 7¼” blade to cut 4×8′ sheets of plywood for cabinets. Handle the saw carefully because the telescoping blade guard will not extend through the zero-clearance base to cover the spinning blade. Then retract the saw blade above the base, and attach the zeroclearance plate using double-face tape.
In general, many woodworkers either use combination blades or rip blades when cutting plywood, and both types of blades are perfect for plywood cutting. Given the many types of brands and models of circular saw blades in the market today, choosing the best blades become doubly difficult. A circular saw is a versatile tool, and as long as you are using the right blade, you can quickly cut through plywood using a circular saw and end up with a refined finish.
To save you time and money from damaged materials, I have written the best circular saw blade for plywood reviews. While cutting plywood with a circular saw, stack a sheet face down so that chips or burrs appear on the bad side, where your saw slides. Back to menu Circular Saw Blade for Plywood FAQ. In this section, I answered frequently asked questions from my readers about working with plywood.
what circular saw blade for plywood Related Question:
What kind of saw blade is best for cutting plywood?
For circular saws, grab a $15-20 carbide tip blade designed for plywood. For table and miter saws, invest in an 80 TPI plywood blade, one designed for cross (miter saw) or rip (table saw) cuts.
What circular saw blade is best for cutting plywood and why?
Best Circular Saw Blade: Ultra Fine Finish With 60 teeth and a . 059-inch kerf, the Freud D0760X Diablo Circular Saw Blade creates clean, smooth cuts on delicate material like veneer plywood and melamine. This thin kerf greatly reduces the chance of chipping and blowouts, and doesn’t waste any material.
How many teeth should a circular saw plywood blade have?
Framing blades have 24 teeth and are effective for jobs such as rough carpentry, where speed is more important than getting a clean cut. Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering.
Is a circular saw good for cutting plywood?
Circular saws can be used to make square, miter, bevel and compound-angle cuts. When fitted with the appropriate blade, it can even cut metal and concrete. However, there’s one job for which the circular saw is particularly well-suited: cutting large sheets of plywood down to size.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
How many teeth do you need for plywood?
Plywood blades have 100 or more fine teeth designed to create a finish with minimal splintering. Thin-kerf blades have a narrow profile for faster, easier cutting and less material waste.
What is a 60 tooth saw blade used for?
It’s better suited for cutting melamine, chipboard, and plywood. Usually 60 to 80 teeth (on a 10″ blade) with shallower gullets between teeth and a more gentle forward rake around 10°.
What is a 24 tooth blade used for?
For most construction work, a 24-tooth general use blade is sufficient. That blade is very aggressive and will help you rip and cross-cut lumber and sheet goods quickly and with a high degree of accuracy. With a 24-tooth demo blade, you’re getting work done quickly, but you won’t get a near-finished edge.
What is a 180 tooth saw blade used for?
Designed for cutting a variety of materials, including plywood, vinyl siding, and plastic, the CRAFTSMAN 10-in 180-tooth high-speed steel miter/table saw blade set is a must-have for your workshop.
When cutting plywood with a circular saw which side is up?
Also note that a circular saw cuts on the upstroke, which often splinters the top edge (veneer) slightly. The bottom edge usually remains splinter-free. So always cut plywood with the good side down.
How do you square plywood with a circular saw?
Making perfectly square crosscuts with a circular saw is easy, if you guide the saw with a layout square (a framing square or Speed Square will work). Hold the saw in place with its blade right on the cut line. Then slide the square against the saw’s base plate, and press it tightly against the edge of the board.
Why does my saw blade burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What size blade do I need for my circular saw?
Most circular saws come standard with a 7¼-inch-diameter blade and a motor that draws 8 to 15 amps of power.
What is a 140 tooth saw blade used for?
OVERVIEW. The CRAFTSMAN 7-1/4-in 140-tooth carbon circular saw blade is made for cutting plywood, OSB and plastic. With a fully hardened and fully flattened plate, along with 140 precision-ground teeth, this blade delivers precise cuts without chips or splinters in the wood or cracks in vinyl and plastic materials.
