Easy to move around thanks to a small and lightweight design. lock the throttle so that it doesn’t start up by itself. A 90-degree angle head makes it easier to move around in small spaces.
It has a 0.32 HP motor and can reach 20,000 RPM. A pneumatic angle die grinder has a built-in speed regulator so that you can better control it.
Many different things can be done with the 90-degree head. It can be used to reach places that are very small or angled.
It has an aluminum body, a rear exhaust, and a strong ball-bearing motor.
It’s good for precision machining, such as smoothing and chamfering. It can also be used to deburr, grind, polish, and engrave.
The following is a list of the features.
Choose different speeds to meet different needs with the stepless speed control knob switch.
Design of the air inlet and exhaust port: air inlet filter design, effectively removes air impurities, humanized annular exhaust design, which is better for the environmen.
Chucks made for industrial use have high precision, low vibration, low noise and high wear resistance. They also don’t get hot and don’t make any heat.
Safe: pressure plate type start-stop switch, more reliable and more reliable than a switch that doesn’t have pressure plates.
1/4 ” (6.35mm. a high-precision collet is made of metal that has been heated to a high temperature. It can withstand more impact strength, and it is made by a precision CNC lathe.
Included parts.
An angle air die grinder with a 1/4 inch cutting wheel.
It comes with 1 piece of 80 grit round brown corundum grinder discs (50mm/2 Inches).
It comes with 1 piece of 400 grit non-woven scouring pad grinder discs that measure 50mm/2 inches.
It comes with 1 Pcs 80 grit Zirconium corundum turn and lock hundred-page grinder discs (50mm/2 Inches).
Each disc is 50mm/2 inches long.
A wrench set with two pieces.
Quick-change discs with a 1/4 inch (6.35mm) holder: 1 Pc.
Back-up collet with a size of 1/8″ (3.18mm).
Air connector: 1 Pc. American standard air connecto.
Product specs.
Collet size 1/4″ (6.35mm) is now in place.
During no-load, the speed is 20000 RPM.
Air use: 2.8 CFM, 80L/min.
In this case, the pressure is 90 Psi.
The power is 0.6HP.
Air inlet specifications: 1/4″ Air Inle.
Item weight: 0.49 K.
Vibrates a lot, which makes it painful to use.
A good tool costs a little more money.
