So we’ve summoned all of our wisdom and powers of brevity to bring you this useful guide to choosing the right circular saw blade. Choosing the right circular saw blade for rip cuts might be even more important. We hope this article about choosing the right circular saw blade cuts through the confusion so you can select the best accessory for the job.
If you want to know which blade to use for a specific project or are just looking for an overview of the types of blades that exist, here we have all the information you need about circular saw blade types. One of the most obvious features of any circular saw blade that will be immediately recognizable even to someone who has never used a circular saw in their life is the number of teeth. They are a good choice if you need one blade for a variety of uses, but if you need a blade for a more specific job, you’re better off buying a specialist blade for that application.
Woodworking saw blades are round circular saw blades that are designed to cut various types of wood, including lumber, plywood, softwood, hardwood, panels and laminates. They can be used in various applications, depending on the type of wood you are cutting and the kind of task you are performing. Blades come in a variety of sizes and can be made of various materials to accommodate different uses.
what circular saw blade for fine cuts Related Question:
What saw blade makes the smoothest cut?
With fewer spaces between the teeth, crosscut blades remove less material, resulting in a smoother cut. It also means it takes these blades longer to move through wood. Crosscut blades are the go-to choice for finish carpentry and other applications that require precision and a smooth finish.
Is more teeth on a saw blade better?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.
What is considered a fine tooth circular saw blade?
A 40-tooth blade works fine for most cuts through plywood. Blades with 60 or 80 teeth should be used on veneered plywood and melamine, where the thin veneers are likely to blow out on the underside of the cut, a characteristic known as tearout.
How many teeth should my circular saw blade have?
Number of Teeth Generally, blades with more teeth will provide a smoother, finer cut whereas blades with fewer teeth will provide a rougher cut. The benefit of fewer teeth is faster cutting and a lower price. For most construction work, a 24-tooth general use blade is sufficient.
What is a 60 tooth saw blade used for?
It’s better suited for cutting melamine, chipboard, and plywood. Usually 60 to 80 teeth (on a 10″ blade) with shallower gullets between teeth and a more gentle forward rake around 10°.
How many teeth blade for ripping?
Ripping: 10-inch blades with 24-30 teeth and 12-inch blades with 40 or fewer teeth. Crosscutting: 10-inch blades with 60 teeth and 12-inch with 80 teeth.
What is a 40 tooth saw blade used for?
Deep gullets provide good chip removal. Crosscut blades, made for cutting across the woodgrain (across the face of a board), have between 40 and 80 teeth and are designed for clean cuts. Smaller gullets separate the teeth. Combination blades can make both rip cuts and crosscuts.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
What is a 140 tooth saw blade used for?
OVERVIEW. The CRAFTSMAN 7-1/4-in 140-tooth carbon circular saw blade is made for cutting plywood, OSB and plastic. With a fully hardened and fully flattened plate, along with 140 precision-ground teeth, this blade delivers precise cuts without chips or splinters in the wood or cracks in vinyl and plastic materials.
Are Diablo blades worth it?
Diablo blades are available in a wide selection of sizes and styles and are easy to find online and locally at Home Depot. The consensus is that Diablo saw blades balance great quality with excellent value, and are a good choice when replacing or upgrading the OEM blades that are often bundled with new saws.
What is an 80 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
What size blade do I need for my circular saw?
Most circular saws come standard with a 7¼-inch-diameter blade and a motor that draws 8 to 15 amps of power.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
What is a ripping blade for?
The best saw blade for ripping hardwood is a rip blade. This blade is specially made for cutting through wood fibers, so it will cut through hardwood easily and leave a clean edge. Rip blades usually have 10 to 40 flat-topped (FT) teeth, which is a comparatively small number, but it will move through the grain quickly.
What is the purpose of the gullet on a saw blade?
Gullet. The space between the teeth and the body of the saw. This space holds the sawdust while the teeth are in the cut. The gullet must be large enough to hold all the sawdust produced.
