I planned to replace it once I settled into my new house, but when the time came to build a room divider/bookshelf unit, I decided to build a couple of my own makeshift circular saw guides instead. The guides are compact and store easily. It’s quick, safe and especially useful when you need to cut a sheet of plywood down to size or to rip a long straight edge on a wide piece of lumber to prepare it for further ripping on a table saw. The only difference is that I put a 1 x 2 stop on the bottom, perpendicular to the 1 x 4 guide, which automatically squares the guide across the piece being cut.
Ensure straight cuts with these two, simple cutting guides. With these two saw guides, you can use your circular saw to make cuts that rival a table saw’s for speed and accuracy. Like the straightedge guide, the crosscut guide is customized to your saw so you can simply line up the edge of the guide with your cutting mark and clamp it.
Making straight cuts in plywood is super easy when you have a straight edge to guide your saw. How To. See how easy and fast it is to make this Circular Saw Straight Edge Guide. Now you can have both of these cuts done for you at your home center, but if you have another sheet of plywood laying around that still has a straight factory edge on it, or another long straight edge, you can use that.
how to circular saw guide Related Question:
Is there a guide for a circular saw?
The Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws is a heavy-duty rigid aluminum guide. The set comes with a 50-inch clamp and a 50-inch extension, so It can cut boards up to 100 inches wide, and the adjustable clamp holds the guide firmly to any surface.6 days ago
Are guide rails universal?
The YouTool Guide Rail is universally suitable for almost all brands of saw, and is available up to 5 meters long.
Do I need a guide rail for circular saw?
Simply put, it’s the best way to guarantee precise, straight, accurate cuts, either at 90º or 45º. If you need to cut workpieces that must be cleanly and accurately joined together, a circular saw (properly set up) and a guide rail is the way to get this done.
Can you use Makita circular saw on guide rail?
Enables use of DHS680 Circular Saw with the Makita guide rail system. This adaptor can be attached to Makita circular saws, which allows you to use the circular saws with the Makita SP6000 guide rail system for precise, straight routing cuts.
Which side should the blade be on a circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
Which way should the teeth face on a circular saw?
The teeth should be cutting UPWARDS, in a clock-wise direction. You’ll also notice that when your blade is installed correctly, the teeth will be pointing upward. Remember: circular saws (as most saws) cut on the upward stroke.
What is used to guide the piece through the saw?
A “Push Stick” is: A plastic handle or scrap wood shaped so that you can guide the work piece without getting your fingers near an active blade.
Is Kreg Accu cut worth it?
Kreg Accu Cut Review – Final Thoughts While it would be nice to have a tool-free option to set up, the setup is simple and quick. The quality of the cut is great and it’s very easy to use the system. While it should offer longer cut runs and you don’t have the ability to plunge cut, it’s worth every penny.
Does Dewalt circular saw fit guide rail?
The circular saw is guide rail compatible, allowing it to be adjusted accurately to the guide rail for quick and easy cutting.
Which cut is when you cut a straight 90 degree across the grain?
A crosscut is a straight, 90-degree cut that cuts across the grain of the wood. Usually, that means turning long boards into shorter ones. On a table saw, you will usually use a miter gauge to make crosscuts. It’s the most basic cut you can make.
What is a straightedge tool?
A straight edge is a cutting guide tool for copying a straight line from one location to another or checking the straightness of a line already drawn. A straight edge with equally spaced markings on it is called a ruler.
