If you have a circular saw or are planning to get one, then the wise thing for you to do, as with any other power tool is to learn the safety tips and precautions you need to take when using the saw. Good safety tips and precautions must be understood and followed diligently before using a power tool like the circular saw. The following are some of the safety tips you must adhere to while using a circular saw.
If your circular saw blade catches on thin-shave cuts or angled cuts, rotate and hold it open with an extended fingertip while still keeping both hands on the saw. Always wait for the blade to stop moving before setting the saw down on your work surface. Getting a circular saw with a blade brake will reduce your wait times.
HOW TO PROPERLY USE A CIRCULAR SAW AND PREVENT KICK BACK. Among professional tradesmen, on the farm, around the house and in the vocational shop, the circular saw is probably the most commonly used power saw, and perhaps the most commonly abused. PREVENTING PORTABLE CIRCULAR SAW KICKBACK. Kickback is a sudden reaction to a pinched blade, causing an uncontrolled portable tool to lift up and out of the work piece toward the operator. Above information taken from THE TOOL GURU: How to properly use a Circular Saw and prevent kick back.
how not to use a circular saw Related Question:
Is it safe to use a circular saw with one hand?
One hand on the saw is not a safe work practice, especially not for someone who self-describes as a novice. Hang on solidly for a few years and then see if you want to adopt a few bad habits.
What PPE are you likely to need for a job requiring cutting with a circular saw?
Safety glasses and face shield must be worn at all times in work areas. Appropriate hearing protection (Class 5-SLC80>26 dB) must be worn. Protective, steel-toed work boots must be worn. Long or loose hair must be tied back and contained.
What is the safest type of saw?
TYPE OF SAW: Jigsaw Considered one of the safer power saws, the jigsaw features a large flat base called a “shoe,” which rests flat on the surface of the material you’re cutting and surrounds the blade and offers some protection.
Should you wear gloves when using a circular saw?
Should You Wear Gloves When Using a Circular Saw? You should never wear gloves when you use a circular saw, as the fabric of the glove can get caught in the blades of the saw and pull your hand into the saw blade. Any kind of loose fabric can get caught in the moving parts of a circular saw and cause serious injury.
Are circular saws safe?
Circular saws have faster blades than table saws, with an outer edge spinning at about 120 mph, and they can cause some serious damage if used incorrectly or recklessly. A study in Australia’s Hazard Magazine found that of all reported saw injuries, circular saws make up the largest group at 30 percent.
Does a homeowner need a circular saw?
Most new homeowners will want a power saw of some kind, and a circular saw is a good starting point— can handle far more cuts than you’d think.
How thin can you cut with circular saw?
And now if you want to make another repetitive cut, you can do it easily without adjusting the pliers or the saw itself. Now when you have the pliers clamped on this side of the shoe—on the blade side—you can typically cut up to about one and a half to two inches.
What is circular saw kickback?
PREVENTING PORTABLE CIRCULAR SAW KICKBACK. Kickback is a sudden reaction to a pinched blade, causing an uncontrolled portable tool to lift up and out of the work piece toward the operator.
What is the appropriate guard device for a circular saw?
“Hand-fed ripsaws.” Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose the portion of the saw above the table and that portion of the saw above the material being cut.
How can you tell if circular saw kickback might happen?
Kickback happens when the saw blade binds or stalls suddenly in the wood and the saw gets driven back toward you. So the key to preventing this is to make sure your blade doesn’t bind in the wood.
What causes saw kickback?
Kickback occurs when the teeth of the saw blade, moving at tip speeds of 120 miles-per-hour impart sufficient force to cause the workpiece to move in a violent and unexpected manner. Skil saw kickback tends to throw the saw back at the operator, its blade often running over fingers as it moves backwards.
Can I rip wood with a circular saw?
One of the most common ways we use to make rip cuts with a circular saw is to clamp a straight edge. To do this accurately, you need to know the distance from the edge of your shoe to the blade. From your cutline, clamp both ends of your straightedge the distance you measured between the shoe edge and blade.
What can you do to prevent contact with the blade when using a circular saw OSHA?
For all circular saws where conditions are such that there is a possibility of contact with the portion of the saw either beneath or behind the table, that portion of the saw shall be covered with an exhaust hood, or, if no exhaust system is required, with a guard that shall be so arranged as to prevent accidental
Is circular saw safer than table saw?
Circular saws are generally more affordable than table saws, and they are also much safer. While it is perfectly possible to cause a serious injury with a circular saw, they are still much safer than table saws.
What saw to use to cut shiplap?
Table Saw. I can fly through most of my shiplap installations without using my table saw. I typically use my table saw to rip down the last few pieces of shiplap to fit the spaces where a full width board is too wide. A rip cut is cutting a piece of wood parallel to the grain.
