It’s obviously less precise than using either a miter saw or a table saw, but with some preparations and practice it can definitely be a great substitute if you don’t have the budget or space for a big ol’ saw. Here’s the video with all of the details on the circular saw and how it’s used. We use our circular saw mostly when we’re working on a project that we need to be able to quickly cut some wood down without having to haul it back to the workshop and set up the table saw – it’s 100% portable and much easier to lug around than a bigger saw would be, so it’s great for smaller jobs or things where you just need to cut some boards down in a hurry.
Last update on 2021-02-15 / Affiliate links / Images from Amazon Product Advertising API. This Porter-Cable saw may offer the best value for someone who just wants a circular saw to get started. The saw itself weighs 9.5lbs, which is about average in the circular saw category. The bevel adjustment on a circular saw allows you to tilt the saw blade and cut angles up to 45 or even 56 degrees.
Cut the angle first with the saw at 90 degrees, and then use the off-cut to support the saw while you cut. If you grab your jigsaw whenever there’s a curve to cut, next time try your circular saw instead. It’ll do a sterling job for long, gradual curves in a fraction of the time a jigsaw will. If you’re cutting plywood, set the saw to cut just deep enough to cut through the wood.
how to use a circular saw for beginners Related Question:
How do you use a circular saw without a table?
Fit your circular saw with an edge guide. Set the depth of the blade accurately enough for it to go through the wood and not cut under the surface. Place the guide on base of the circular saw lines and markings you made earlier on the wood. Ensure that the saw is free to move, and the power cord is not entangled.
Which side should the blade be on a circular saw?
For blade-right models, the correct circular saw blade direction is usually with the label side out. For saws that have the blade on the left, it typically installs with the “ugly” side out.
How shallow can a circular saw cut?
Circular saws turn corners about as well as a freight train, and standard models will cut only about 2 1/2 inches deep. There are ways around the shallow cut—for example, you can flip over a 4×4 and cut from two sides—but the curve limitation has no work-arounds.
Why does circular saw kickback at end of cut?
Overheating a saw blade can cause it to warp and result in a kickback. Buildup of sap on the blades, insufficient set, dullness and unguided cuts, can all cause an overheated blade and kickback.
How do you use a circular saw without a sawhorse?
In some cases, it might be better to use your circular saw without a sawhorse. If you need to make cuts without a work support, you can lay a sturdy, stationary surface under the material while making cuts.
What is the difference between a circular saw and a table saw?
Circular saws are lightweight, hand-held, and can be moved from jobsite-to-jobsite with ease. A table saw is heavier and more complex in its set up. Because of its weight and footprint, this tool is more difficult to move these saws around as easily as you are able to do with a circular saw.
What is the minimum cut with a circular saw?
The circular saw can cut any depth from 0 to about 2 3/8″. This is awesome. But, to get the best quality cut and reduce the possibility of kickback, you’ll want to set the proper cut depth for your material. The blade should only project about 1/4 -1/2″ below the bottom of the material.
When using a circular saw be sure to cut on the waste side of the cut mark to allow for the blades?
Never use a circular saw that does not have an upper blade guard because the. guard protects you from touching the blade. When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade’s. Saws with fine blades that are excellent for delicate and intricate cutting are called.
Why is my circular saw burning the wood?
Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty. If wood pitch resins build up behind the teeth of the blade, the cutting speed will slow down, increasing the chances for burns. Commercial blade cleaners are sold for this purpose.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Why are so many circular saws left-handed?
The placement of the cordless saw blade, on the left side, gives you a clearer line of sight when you cut. The reason for this is because the main bulk of your circular saw is not blocking your view. Cordless circular left-handed saws provide you better movability.
Do all circular saws rotate the same direction?
Circular Saws This means that the circular saw cuts wood on the upstroke. For a right handed circular saw (most common), this means that the blade rotates counterclockwise, which is similar to the table saw. For a left handed circular saw, the blade rotates clockwise.
Can I cut a 4×6 with a circular saw?
However, a regular circular saw with a 7 1/4-inch diameter blade will only cut to a depth of 2 1/4 inches. Cutting on all four sides still leaves roughly an inch of uncut wood in the middle of the post. This is alleviated with either a handsaw, or reciprocating saw.
Why won’t my circular saw cut all the way through?
Here are some reasons your circular saw keeps stopping: Make sure your work piece is properly supported so it doesn’t pinch the blade which could also cause kickback in addition to stopping. Damaged, warped, loose or dull blade. Motor malfunctioning or overheating. Cable problems like frayed cord or weak connection.
How do I know what size circular saw to get?
Circular Saw Features Blade capacity determines the maximum depth of cut a saw can achieve. The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
