Small appliances and light-duty work are what this is made for. No load speed of 260rpm makes it a better screwdriver than a hand tool. It’s small and light-weight, and it has a magnetic hexagonal head, which makes it good for small jobs and light-duty work, like circuit repair, bicycle repair, electrical maintenance, switch installation, and more.
Easy to charge and wireless desig.
It can be charged anywhere that has a USB port, like a laptop, a power bank, a car charger, and so on.
It’s safe to use. A 3-gear mode is forward, backward, and stop. In order to be more in charge of the work, a spindle lock lets people manually fasten and loosen screws. Overdrive protection and variable torgue settings keep surfaces from being damaged and holes from being stripped.
EASY TO USE. Battery level is shown by a battery indicator. A front LED light makes it possible to work in a dark area. A small case makes it easy to carry and store.
It comes with a 4V mini screwdriver, 32 drill bits, an extension bit holder, a USB charger, a toolbox, and a user manual.
It has 4V Smart Screwdriver. In this case, the voltage is 4. 0 V. There is no load on the machine. The speed is 260rpm. 0. 93N. M of torque (variable torque . In manual mode, the max torque is 10N. Chucks can hold 1/4″ (6. 35mm. Hexagona. 1. 50Ah Li-ion (inbuilt. MICRO USB is the charging interface. Under full charge, it takes 3-4 hours to run. 45 minutes for 5V/2A and 90 minutes for 9V/2A (5V1A. Including: 32 drill bits and a rod that can be used to extend the. No charger comes with it. The three directions are forward, backward, and stop.
I work as a Field Service Engineer. I fix ATMs and things like currency discriminators, and I work for a company. Some of these machines have up to 20-30 screws that need to be taken apart. Because I was having trouble with my wrist, I bought an electric screwdriver instead. An electric screw driver was very scary for me because I’ve seen other technicians accidentally strip screws, which makes fixing things more difficult for them. I chose this one because it didn’t have a “pistol style” grip.
I got the screwdriver and found that it already had a good charge. It also has a torque that can be changed, which is something that I wanted to do. I turned it down and went to work on a machine. I like how it’s easy to hold and the extender made it easy to fit into some of the smaller gaps. It was hard to get a screwdriver into one machine because it was so small. They didn’t have any trouble getting this one in. However, when I put the screws back in, I was afraid. You hold the screw driver in your hand with very little torque, so as soon as the screw was in its place, it would turn. This took the pressure off the button and made sure that no screws were stripped.
I also have to keep track of when I work on a machine. Putting some of these machines back together again can take more than an hour and a half. This screwdriver cut about 10 minutes off of my work time and saved my wrist, so it was worth it. It’s great for someone who wants an electric screw driver but is afraid of breaking screws.
