A TCT (Tungsten Carbide Tipped) blade is a resharpened circular saw blade. TCT saw blades can be used for the following items: wood, some ferrous metals, non-ferrous metals and plastics. Typically, a saw blade is a toothed blade designed to cut metal.
The number of teeth on the blade also plays a part in this; fewer teeth for faster, rougher cuts. Because the material you’re cutting is the biggest factor in deciding the type of saw blade you need. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal.
We offer professional tungsten carbide-tipped saw blades and cermet tipped saws for cutting of steel, non-ferrous metals and iron materials. We use only top-quality perfectly hardened steel for the renowned GSP circular saw blades. Short video about TCT saw blades Investment in new technologies 2021.
Normally TCT circular saw blade refers to the re-sharpened saw blade. TCT saw blade refers to the saw blade which can be re sharpened. If you have any non-ferrous metal cutting project, use a TCT circular saw blade would be the best decision for your business.
what is tct circular saw blade Related Question:
What does TCT mean on saw blades?
Tungsten Carbide Tips. TCT saw blades are specifically designed for cutting metal tubing, pipes, rails, nickel, zirconium, cobalt and titanium-based metal. All of this is possible thanks to the teeth on the saw blades, and the tungsten carbide tips, or TCT.
What is TCT blade for wood?
MEW manufactures Tungsten Carbide Tipped (TCT) Circular Saw Blade for cross-cutting, ripping of all types of soft wood, hard wood, panels, laminates, MDF Boards.
What are the 3 basic types of circular saw blades?
They are: Rip Blades, Crosscut, Combination and Specialty blades. Ripping saw blades are designed primarily to achieve a smooth, clean and safe cut when ripping wood or cutting in the same direction as the wood grain.
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
Can you cut wood with TCT blade?
The following items can use TCT saw blade： wood, some ferrous metals, non-ferrous metals, and plastics.
Can TCT blades cut stainless steel?
Designed specifically to cut Stainless Steel. Material applications include square tube, angle iron, stainless steel plate, diamond plate, pipe and tube. Evolution saw blades are designed to deliver maximum performance.
How long do TCT blades last?
Carbide-tipped blades usually cost between $20 and $100 and can last from six months to a couple of years. The cost and longevity of carbide-tipped blades largely depend on the tooth count and the material they’re used to cut. Steel-tipped.
Can a TCT blade cut plastic?
Materials such as plastic or non-ferrous metals and light alloys cannot to be cut with just any blade. Blades designed specifically for these materials will generally be made of tempered steel and will feature a lot of tungsten carbide- or carbide-tipped teeth to ensure accurate cuts.
Which saw blade makes the smoothest cut?
The 44-tooth blade (left) makes a smooth cut and is used for trim carpentry and cabinet making. The coarse 24-tooth blade (right) cuts quicker and is used for rough carpentry work.
Can I use a 7 inch blade in a 7 & a quarter inch circular saw?
The only fine-tooth blade you have lying around is a 7 ¼ inch size. The short answer to the above questions is that you can generally use a smaller blade in a circular saw – within reason. Of course, there will be some drawbacks and changes in performance, especially when you size down by a significant margin.
Is more teeth on a saw blade better?
More teeth means a smoother cut, fewer teeth means that the blade removes more material. Crosscut blades have more teeth and make smoother cuts across the grain of the material, rip blades have fewer teeth, are optimized to cut with the grain, and remove a lot more material.
What size blade do I need for my circular saw?
Handheld circular saws typically accept blades 4-1/2 inches to 7-1/4 inches in diameter. The teeth are often carbide tipped to stay sharp longer. Tile saws most often use 7-inch or 10-inch diamond blades. Table saws and compound miter saws use blades 8-1/4 inches or 10 inches in diameter.
Can I put a metal cutting blade on my circular saw?
Only blades and discs specified for cutting metal should be used. These professional circular saw blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.
Can TCT blades cut Aluminium?
Designed specifically to cut Aluminium and other non-ferrous metals. Material applications include: grating, extrusions, pipe and tube. Evolution saw blades are designed to deliver maximum performance By using the highest grade carbide, hardened blade bodies & ultra high-grade brazing techniques.
What is a HSS blade used for?
HSS Saw Blades are designed for cutting non-ferrous metal and plastic where maximum cutting life between sharpening is required . Ideal for sawing a wide variety of sizes and shapes such as extrusions, tubes, sheets, plates and some bar stock.
