Learn how to use your circular saw to make laser-accurate straight cuts! Here are four sure-fire ways to cut precise straight lines on boards and plywood! Breaking down sheets of plywood or MDF. Tips for Cutting Straight with a Circular Saw Position the speed square, DIY circular saw cutting guide, or Kreg Accu-Cut so it covers the side of the workpiece you want to keep. There are four ways to make straight cuts with a circular saw.
Using a guide to cut with your circular saw is a great way to ensure a straight cut and it’s quick to set up. Make a DIY guide to cut a straight line You can easily make your own cutting guide to use with your circular saw. Final Thoughts on Cutting a Straight Line with a Circular Saw Circular saws can certainly be tricky, especially when making straight cuts – so hopefully you’ll be more confident than ever on your next cut.
If you’re not an experienced user, your best bet to make straight cuts every time is to use a circular saw guide like the Kreg rip-cut guide. It’s great for making straight rip cuts, repeat cuts, and most important of all, you get to make straight cuts every time as you push the circular saw along the slide. Follow the above steps, and you’ll make straight cuts with your circular saw every time.
Despite its name, the portable circular saw cuts only straight lines. The blade in a circular saw rotates so that the teeth come from the lower side and cut up into the workpiece, which means that any splintering that occurs will be on the top of the piece. Adjust the depth of cut so that the saw will cut no more than a quarter inch beyond the thickness of the wood.
do circular saws cut straight Related Question:
What saw makes straight cuts?
Think of a track saw like a train track for our circular saw. The saw rides on a guide rail or track as it cuts. This allows us to make long, straight, accurate cuts. The Accu-Cut is different from the Rip-Cut because it can be used to cut any width board or plywood.
Why is my circular saw pulling to the right?
If the base plate is not parallel to the blade, the saw will also want to travel to the side. If your saw was dropped at some point the base plate could easily be out of alignment. Turning to the right would indicate that the base is farther from the blade at the front than it is at the back.
How do I stop my circular saw from binding?
Avoid circular saw blade binding But cutting a long board in half is different. You can hold one end, but the other must be free to drop or the blade will bind. The trick is to allow the cutoff end to drop slightly, but not so much that it completely snaps off before the cut is complete.
What does straight cut mean?
Definition of straight-cut : having the leaves cut lengthwise —used of smoking tobacco.
What do you use a straight edge for?
A straight edge is a cutting guide tool for copying a straight line from one location to another or checking the straightness of a line already drawn. A straight edge with equally spaced markings on it is called a ruler.
Where do you cut with a circular saw?
When appearance matters, make cuts with the good side facing down, as circular saws can splinter the wood on the top side. Making your cut line on masking tape can reduce splintering. Start over if you see that you’ve veered off from the cut line instead of trying to curve your way back on track.
What is the best saw to make a rip cut?
A table saw is the safest tool to use for most rip-cutting operations, but you should follow these procedures for safe work: Use a push stick—an expendable stick of wood about a foot long and a 1×1 inch square—to push the workpiece the last foot or so through the saw blade.
