If you have a circular saw or are planning to get one, then the wise thing for you to do, as with any other power tool is to learn the safety tips and precautions you need to take when using the saw. Good safety tips and precautions must be understood and followed diligently before using a power tool like the circular saw. The following are some of the safety tips you must adhere to while using a circular saw.
If your circular saw blade catches on thin-shave cuts or angled cuts, rotate and hold it open with an extended fingertip while still keeping both hands on the saw. Always wait for the blade to stop moving before setting the saw down on your work surface. Getting a circular saw with a blade brake will reduce your wait times.
Circular saws are become more popular because of the clean cuts they provide in workpieces. Here is a collection of the dos and don’ts that will brush you up the basics on how circular saws are to be used and maintained. The rules we have provided should get you up to speed on how best to use and maintain a circular saw for cutting.
circular saw do’s and don’ts Related Question:
Why does my circular saw burn the wood?
A dull blade will make it hard to cut quickly, and the slower the feed rate of the saw, the more friction against the wood and the greater the likelihood of scorch marks. Pushing the stock through the saw too slowly is a common cause of saw blade burn. Sometimes a blade that feels dull might only be dirty.
Is it safe to use a circular saw with one hand?
One hand on the saw is not a safe work practice, especially not for someone who self-describes as a novice. Hang on solidly for a few years and then see if you want to adopt a few bad habits.
Should you wear gloves when using a circular saw?
Should You Wear Gloves When Using a Circular Saw? You should never wear gloves when you use a circular saw, as the fabric of the glove can get caught in the blades of the saw and pull your hand into the saw blade. Any kind of loose fabric can get caught in the moving parts of a circular saw and cause serious injury.
What is circular saw kickback?
PREVENTING PORTABLE CIRCULAR SAW KICKBACK. Kickback is a sudden reaction to a pinched blade, causing an uncontrolled portable tool to lift up and out of the work piece toward the operator.
What is the appropriate guard device for a circular saw?
“Hand-fed ripsaws.” Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose the portion of the saw above the table and that portion of the saw above the material being cut.
How safe is a circular saw?
Circular saws have faster blades than table saws, with an outer edge spinning at about 120 mph, and they can cause some serious damage if used incorrectly or recklessly. A study in Australia’s Hazard Magazine found that of all reported saw injuries, circular saws make up the largest group at 30 percent.
What is the safest type of saw?
TYPE OF SAW: Jigsaw Considered one of the safer power saws, the jigsaw features a large flat base called a “shoe,” which rests flat on the surface of the material you’re cutting and surrounds the blade and offers some protection.
When using a circular saw be sure to cut on the waste side of the cut mark to allow for the blades?
Never use a circular saw that does not have an upper blade guard because the. guard protects you from touching the blade. When using a circular saw,be sure to cut on the waste side of the cut mark to allow of the blade’s. Saws with fine blades that are excellent for delicate and intricate cutting are called.
Why does my circular saw keep smoking?
Improperly Set Circular Saw Blade Can Cause Smoking By flaring the teeth, you make sure they are the only thing contacting the material during the cut. If your blade set is disrupted for any reason, then your blade’s body could be contacting the wood during the cut, causing heat and smoke.
How many teeth should my saw blade have?
TPI is the number of teeth the blade has per inch. If you’re looking to cut wood or other soft materials, you’ll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
What do you clean saw blades with?
Caustic oven cleaners are sometimes recommended as the best way to clean table saw blades. Sodium hydroxide, also known as lye, is the main ingredient in many spray-on oven cleaners.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
Can you cut wet wood with a circular saw?
If you’re cutting wet wood set the depth so that the entire gap between the teeth is clear of the board you’re cutting. This will stop your saw and cut line from getting clogged with wet saw dust.
What is the space between two protruding teeth on a saw blade called?
Gullet (handsaw) The space between a saw’s teeth, where the saw dust is carried out. It is an equilateral triangle, just like the file that shapes the teeth.
What are power saws?
A power saw is a portable mechanical machine used for both industrial and DIY projects. It is the type of power tool that comprises sturdy blades, chains, wire, set of teeth, etc. It is basically used for the work piece in large cuts. It can cut wood, plastic, metals, concrete and other materials like tiles and bricks.
