Circular Saw Features The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
For a guide on purchasing circular blades, you can also check our article on best circular saw blades which has a detailed circular saw buying guide at the end. Saw blade thickness is usually referred to as the ‘kerf’ of the blade and is measured in thousandths of an inch. A smaller blade will cut less material with each revolution and rotate at a higher RPM. While most circular saws will accept smaller blade sizes, you’re better off just using the recommended blade size.
Buy a good circular saw now and you can expect to still be using it in 10 or 20 years. Many tool manufacturers now offer sets of power tools that use the same batteries, and if you already own several tools by one manufacturer, adding a cordless circular saw that uses the same batteries is an affordable option. A well-shaped handle and good balance can go a long way toward making a saw more comfortable and efficient to use, so don’t overlook these features when choosing a circular saw.
most popular circular saw blade size Related Question:
What is the standard size for a circular saw?
The most widely used circular saw is the 7 1/4 inch, but most refer to this saw as the 7 1/2-inch saw. If you have questions about it, either blade works. Look for the blade’s diameter on the side of the blade. This all-purpose saw works well for cutting 3/4-inch thick plywood or lumber.
What type of blade is best for circular saw?
Mostly, a 24-tooth circular saw blade is preferred by many people, especially if you have to cross-cut lumber and sheet materials. The 24-tooth blade is good enough for you if the diameter is 7¼”. However, as the diameter increases, you should also consider looking for circular saw blades with more teeth.
What is the most common saw blade thickness?
The plate of a saw blade is often 1/8 to 1/4 inch thick. The thinner plate means that there is less sawdust and potentially less waste.
What size circular saw will cut a 4×4?
Cutting a 4×4 with a Circular Saw – Guide If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
Is a 12-amp circular saw good?
Power Rating Today, 15-amp saws are the standard; 10- or 12-amp saws are appropriate only for infrequent use. The price difference just isn’t that significant for a purchase you can expect to use for many years. The higher the amperage, the more cutting power the saw will have.
Are cheap circular saws any good?
Best Budget: Skil 5180-01 Circular Saw The Skil 5180-01 is an excellent budget option since it will give you reliable cutting power and durability at an affordable price. At just 7.2 pounds, it is a couple pounds lighter than the other top picks.
Can I use a bigger blade on my circular saw?
The answer is generally this is not a great idea. A larger blade will put excess stress on the motor, and may not have enough strength to provide the cutting power at the tooth you need.
Can a 6 1 2 inch circular saw cut a 2×4?
Circular Saw Features The larger the blade, the deeper the cut. The most common blade diameter is 7-1/4 inches. Most saws with blade capacities of 6 inches or more can cut through 2-inch dimensional lumber at a 45-degree angle in a single pass.
What is a 40 tooth saw blade used for?
General Purpose Saw Blade. Diablo’s general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks.
How deep can a 6 1 2 inch circular saw cut?
The 18V Brushless Lithium Ion 6-1/2 Inch Deep Cut Circular Saw (C18DBALQ4) is a revolutionary cordless circular saw utilizing a 6-1/2″ blade which allows a 2-19/32″ cutting depth, making it one of the deepest cutting cordless circular saws on the market. This circular saw has a similar cut capacity as a 7-1/4″ saw!
How deep can a 6.5 circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4.
Are most circular saw blades are carbide tipped?
These are the most common type of circular saw blades, consisting of a steel disc with carbide-tipped cutting teeth around the outside edge. These blades are typically used for cutting through wood, but specially designed carbide blades can also cut through light-gauge metal.
What is a 60 tooth saw blade used for?
A crosscut blade, on the other hand, is designed to produce a smooth cut across the grain of the wood, without splintering or tearing. This type of blade will usually have 60 to 80 teeth, and the higher tooth count means that each tooth has to remove less material.
Is more teeth on a saw blade better?
More teeth means a smoother cut, fewer teeth means that the blade removes more material. Crosscut blades have more teeth and make smoother cuts across the grain of the material, rip blades have fewer teeth, are optimized to cut with the grain, and remove a lot more material.
What type of saw blade is best for cutting pressure treated wood?
General Purpose Wood Saw Blade. Diablo’s general purpose blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo’s blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks.
