Circular saw sizes are usually classified by the diameter of their blades. Sizes of 5-1/2 to 7-1/4 inches are the most common. There are also many options available on circular saws. Choose the best circular saw for your specific needs.
Power is what gives the saw cutting ability, the higher the power, the better, when it comes to choosing a circular saw. There are two figures used by manufacturers to rate the power of a circular saw in the UK and Europe Watts is used and in the US amperes are used. For cordless circular saws as with other cordless power tools, the Volts will determine how much power is available, the most common power supply or battery size for power tools is 18V. As I said before many top brands like Hikoki, DeWalt and Makita have invested in new Lithium-ion technology and offer much higher voltage cordless options that give a great cutting performance.
Buy a good circular saw now and you can expect to still be using it in 10 or 20 years. Many tool manufacturers now offer sets of power tools that use the same batteries, and if you already own several tools by one manufacturer, adding a cordless circular saw that uses the same batteries is an affordable option. A well-shaped handle and good balance can go a long way toward making a saw more comfortable and efficient to use, so don’t overlook these features when choosing a circular saw.
The larger the diameter of the circular saw blade, the deeper the saw is able to cut. How deep the circular saw can cut is determined by the particular model of circular saw and the diameter of it’s blade. To further prevent blade kickback, support the board or panel near the cut, and never attempt to remove the saw from the work or pull the saw backward while the blade is in motion.
circular saw sizes Related Question:
Can a 6.5 circular saw cut a 2X4?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it’s when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can’t. Cut through a 2×4. Of course more capacity, typically means more weight.
How deep can a 10 inch circular saw cut?
Makita 5104 14 Amp 10-1/4-Inch Circular Saw This large cutting capacity sidewinder can reach depths of 3 ¾ inches at 90 degrees, which allows users to easily cut into some timbers.
Can a 5.5 inch circular saw cut a 2X4?
Yes! A 5.5 inch circular saw blade is perfect for cutting a 2X4. The blade capacity is deep enough to make a crosscut in 1 stroke. If you want to make a 45 bevel cut then you will need to make 2 strokes.
How deep can a 7 1/4 inch circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
Can you use a 7 blade on a 6.5 circular saw?
NO, a 7″ blade will not fit inside the blade guard. Also, it’s rough on these little saws cutting concrete or tile unless you reduce the blade size.
How thick of wood can a 5 1 2 circular saw cut?
The blade, located on the left side, cuts up to 1-3/4-inch at 90 degrees and 1-3/16-inch at 45 degrees.
Can a circular saw cut a 4×4?
Circular Saw. A circular saw is one of the best means of cutting a 4×4 post. Most people own a circular saw, its portability makes it easy to cut 4x4s from the ground, and they can make precision cuts by using a relatively simple trick.
What size saw do I need to cut a 4×4?
If you need to cut a 4×4 post, then the ideal tool is a large 12” miter saw. This saw has the blade diameter needed to chop through a 4×4 in a single pass, so if this is an option for you it’s the way to go.
Will a 4.5 inch circular saw cut a 2×4?
The new WORXSAW Compact Circular Saw is capable of cutting a 2×4 in a single pass. The compact circular saw features a 4-1/2 in. blade that is up to 50 percent lighter than a full-size 7-1/4 in.
Can a 5 3 8 saw cut 2×4?
The lighter 5-3/8 inch saw blades would cut through that 2×4 at 90 degrees, but could no longer get all the way through the wood at a 45 degree bevel. So they could cut the occasional 2x they were more generally used for 1x stock and panels.
How deep can a 5.5 circular saw cut?
It turns out that it’s a simple question but very essential when you are going to do a project using this kind of saw. To sum up, a standard circular saw can offer a cutting depth of 2.5 inches as the maximum, but you can adjust the depth to match your requirements.
Can I cut a 4×6 with a circular saw?
However, a regular circular saw with a 7 1/4-inch diameter blade will only cut to a depth of 2 1/4 inches. Cutting on all four sides still leaves roughly an inch of uncut wood in the middle of the post. This is alleviated with either a handsaw, or reciprocating saw.
How deep can a 4 1/2 inch circular saw cut?
The max cutting depth is 1-11/16″ at 90 degrees and 1-1/8″ at 45 degrees. The saw also features a depth of cut adjustment lever and a 1-1/4″ vacuum adapter.
Can I put a 5 inch blade on my circular saw?
While you can certainly use a smaller blade in a circular saw – as long as you keep it within reason, you might also be wondering if you can use a bigger blade in a circular saw. The answer is generally this is not a great idea.
How thick of wood can a 6 1 2 circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It’s perfect for cutting small materials for a small DIY project.
