At 0° to 90°, the drill can be turned.
Is made of Iron and weighs about 4.2lb. The base is not included, but it only weighs about 4.2lb.
Min-Max Clamp: 38 to 43m.
The main rod is 25*400mm.
The trip: 60mm (50mm is most suitable for long time work.
At 0° to 90°, the drill can be turned.
Copper plugs need to be checked to make sure they are precise and long-lasting.
Precise: transparent pointer, spacing function.
One Drill Bracket is included in the package.
Note.
The adapter sleeve comes with jaws that measure 38-43mm. It can fit 38-43mm. Please add up before you make your drill size.
In this case, you could cut a piece of cardboard or rubber mat to make your own drill. If your drill is bigger than the jaws (more than 43mm), don’t buy it.
An easy way to set up the drill stand is to clamp it to the area that the side handle clamps to. This makes it work well with my Dewalt DWE5010. With the clamp adapters that come with the stand, many other drills should be able to use it, too. I use the drill stand all the time to drill through metal, plastic, and wood, and it isn’t too bad at it. I can also put a wire wheel into the drill and use it as a mini bench grinder. There are some problems, though. The instructions for the drill stand are in Chinese, so if you don’t speak or read Chinese, this may not be the drill stand for you. As well, the brand is not Ogrmar, because the tool is called. As a professional drill can drill through everything I work with for $40, this is a good deal.
