Widely Use’: It’s good for a wide range of materials and applications, and it meets your needs for nailing. 25mm to 50mm brad nails are good for this job “2”. 18 Gauge; Staples that work with this are 20mm to 40mm (1 3/16″ to 1 9/16″) long. The gauge is 18 Gauge.
It’s easy to switch between single and contact firing modes with our dual mode toggle switch, which makes it easy to deal with high-intensity work in a variety of ways.
The regulation knob can be turned to change the nailing depth.
Special Improvement: A 2Ah battery that can be removed can work 400 to 500 nails. With LED lights, you can go into a lot of dark places.
Humanized Design: It has a built-in efficient air compressor, wireless use, is lightweight, has a malfunction LED, a non-slip rubber handle, and a portable hook design that makes it great for any job.
Anyone who has a question can reach us at any time and we’ll help.
You should hold the machine with your right hand and load nails and staples with your right hand. Make sure you don’t put nails that are longer than 2″ into the nailer, because if you do, the nailer could get stuck. When you get stuck: Take out all the nails. Keep the magazine open and fire with the magazine open. —The machine will fix and move the piston back to the right place after it is done. . The screws on the nose should be tight. And it should have enough power.
Style: 2 AA batteries.
Customer service that is goo.
To get help with any quality or use issues, just call us. Always, we’re here for you.
A product’s features and benefits.
1.Adjustable Nailing Depth: Turn the knob to change the depth to deal with different nailing situations.
2.Nailing clip: Aluminum alloy, surface nitriding, anti-wear, durable, lightweight.
3.Portability Design:Wireless use and a humanized hook design make it work in places where there is no electricity.
4.LED lighting: Enough to light up a lot of dark places.
LED lights up red when there is a jam, red when the battery is low, and green when there are no nails.
The nail gun can only work when the safety switch is turned on. This is to make sure that people don’t accidentally use the nail gun.
There are two ways to work with the 7.2: You can use the single firing mode to do work quickly, and you can use the contact firing mode to do work slowly.
Instructions for safety.
The battery pack needs to be taken out when you are checking the safety thimble and the switch trigger, scavenging a nail, or fixing it.
Keep your finger away from the switch trigger when you aren’t nailing so that you don’t nail yourself.
3.Before you start working, make sure that the working mode is correct.
5.Never point the nail gun at anyone.
The following are some of the product’s specs.
Battery: 110V to 240V, 50/60H.
It takes 18VDC and 2000mAh to start.
Li-ion batteries are used in this type.
At its fastest, the machine can fire 100 nails or staples per minute at full speed.
The magazine can hold up to 100 nails or staples at a time.
Nails can be up to 50mm long ” (2″. It is made of 18 Gauge. Brad Nail: Brad Nail.
Staples can be up to 40mm (1 9/16 inches) in length “Is this what you meant. Light duty: 18 Gaug.
The staple is 285x274x96mm.
Weight: 2.65Kg.
Around 45 minutes, this is how long it takes to charg.
Shots/full charge: 40.
It comes with a cordless nailer, two batteries and a charger. It also comes with 200 brad nails and 200 staples.
The media couldn’t be loaded because it was too big to move.
In less than a year, it’s dead. Beware.
Original: I bought this tool to help me replace my baseboards. I was a little afraid to buy a brand that didn’t have a name. A small led light fell out of the tool when I put my first nail in. This made me feel less safe.
Because of this, since then, this tool has always worked perfectly. 1.5″ to 2” nails and one nail have been driven in “There are no problems with putting staples into a wide range of woods and MDF. Yes, it is. Cordless Ridgids and tools like them aren’t any heavier than other cordless tools. Battery life has also been very good. I’ve changed the battery once in four days of nailing baseboards and door trim, but I haven’t used it yet. Because this tool has worked out so well for me so far, I’m very happy with how it works.
