They are used to loosen and tighten bolts with low to medium torque in applications where an impact wrench can’t be used because it could damage the threads or even break off the bolt heads or studs.
[COMPACT]: The length of this air tool is only 13.5 centimeters, which makes it small, lightweight, and easy to use while allowing you to get to hard-to-reach fasteners in small spaces and areas.
[LIGHTWEIGHT]: This air ratchet weighs less than a pound, making it easy to work for a long time without getting tired of your hands.
[RPM]: The mini ratchet has a free speed of 350 RPM and a maximum torque of 30 foot per pound, which gives it a lot of power for its small size. It can easily remove and install fasteners, making it great for motorcycle and small engine work in the automotive and motorcycle industries, as well as other jobs.
A switch on the latch handle controls the speed of the torque, making it easy to switch between clockwise and anticlockwise direction.
With an air compressor, this ratchet can run at about 90 PSI, and it can run on air pressure of 2.6 CFM. It has a 1/4″ air inlet, 3/8″ air hose, and a 1/4″ air outlet.
The mini 1/4″ drive air ratchet can be used to get into places that are very hard to get to. The air ratchet is just 13.5 centimeters long and weighs less than a pound, which makes it very easy to use and reduces hand fatigue while you’re at work. If you think this tool is small, don’t. It has 350 rpm and 30 foot pounds of torque that can easily loosen or install your screws. The latch-style lever makes it easy to control, and a switch lets you change the way it moves. At work, you don’t have to worry about dust getting in your face because the bottom exhaust keeps it out of your way. It runs on 2.62 cfm air pressure with 1/4″ inlet size, 3/8″ hose size with 90 PSI air pressure.
In my job, I use this tool all the time to fix cars. In my opinion, both of them are made in the same factory. Nobody can use an air tool for ever. Expect two years of hard work. This is a good 1/4 inch nut runner. It helps me save a lot of time. A 1/4-drive air tool isn’t supposed to be very powerful, so the torque numbers aren’t great. They might be about 90 inches pounds. Effort goes down when the head gets hot, and so does the rest of the body. Learn about your tool. Finally, this isn’t the right tool to use to tighten up a trans pan. No air tool can do that. For the price, I think it’s a great deal, and I’m going to buy another one when this one runs out. A great tool for a great price.
