Powerful tools
It’s made by Milwaukee.
In China, they make things.
Features
3/8-inch single-sleeve ratcheting chuck for the most versatility and grip possible.
An extended paddle switch lets you use it in a variety of ways.
An electronic clutch with 11 settings and a drill mode gives you full control.
Built-in LEDs light up the work surface and show when the clutch is out.
The on-board fuel gauge shows how much time is left on the M12 lithium-ion battery pack.
An overview of what this item is about
drill, 12V DC. Bare Tool, Cordless Tool
This type of battery is called Li-Ion. It has a brushless motor, no batteries, and a no-load speed range of 0 to 800 RPM.
It has a 3/8-inch chuck, but it doesn’t say how much power it has or how much torque it can make. It doesn’t have a battery in it, and it doesn’t have an electronic clutch.
2XKZ6, Tool Length 11 3/4 in, Tool Weight 2 lb from the manufacturer
The 2415-20 M12 cordless 3/8-inch right angle drill driver has a head that is only 3.75 inches long. It has 100 inch-pounds of torque in a small, lightweight package.
2415-20: This is the first small right angle drill driver with a spindle lock chuck. It is the most versatile right angle drill/driver on the market.
An electronic clutch, fuel gauge, speed control, and overload protection are all built in.
Drill driver: 2415-20 right angle (tool only).
::::::::::::::::::::
Check to make sure you really need a right angle drill before you buy one.
It will be less comfortable to use as a drill because it is hard to push down straight.
So wear gloves that are thick.
There are places where it can’t get, but as a screw or nut driver, it can (which is what I needed).
There are times when it is useful, but it isn’t the tool you’ll reach for when things are going well.
Talk about that.
limiting the torque.
As far as I can tell, this is just a measurement of how much power the motor needs.
When it goes over a certain amount, the power is cut and a red light comes on.
To set this, you use a thumb wheel.
Kind of a bad idea for a clutch. I’m not sure I’ll use it.
This brings up two more things. This brings up two more things.
This is not a “fuel” tool because it has a brushed motor instead of a brushless motor.
Batteries don’t last as long because this design isn’t as efficient.
I read reviews where people said that one LED was broken.
Uh, guys, that second LED was the red one for an over-torque event. It was on.
It is not another white LED.
Get one that is bright enough.
Finally, the speed can go up to 800 rpm.
It can’t be changed by range, only by the trigger or paddle.
It’s a little slow, but with this motor and gearbox, that’s about the best you can hope for.
There is no need to worry.
Don’t buy it unless you want to.
The right angle drill is a unique item.
There are times when this can be used for light work to get you out of a jam.
