Buy AIOPR 1.5Amp Oscillating Multi Tool Kits with 3 Saw Blades, 1 Semi Circle Blade Sanding Plate, and 6 Sanding Pads (86221)

POWERFUL AND DURABLE. The 1.5Amp motor has enough power (0-22,000 opm) to make working easy and save time. Strong metal parts make it more durable.

To change attachments quickly. A universal screw makes it easy to attach things quickly and with almost no down time.

It can be used in many ways. It is good for a lot of different materials and can do even the most difficult jobs.

When you buy something, think about how comfortable and easy it is for you to use. vibration control makes the multi-tool easy to move around on the work surface because it doesn’t make noise.

What You’ll get. It comes with a scraper, a metal blade and a saw blade. It also comes with a triangular sanding pad and 6 sheets of sanding paper in different grits: 60 grit, 80 grit, and 120 grit.

In the past, I’ve had a value-brand cordless multitool that ran out of battery power a lot while I was working on something. There isn’t a way to get a new battery for it. Aiopr has a corded multitool that comes to the aid. Otherwise, this is only a single-speed model.

Because some points of drywall screws are protruding through a piece of oriented-strand board in an area I’m wiring, which isn’t good because the points could damage and short out the wiring. I was excited to get this so I could try it out. The tool had a long cord that got to the work area very well. I put one of my own blades on the tool to see how it worked. I had a problem with the tool cutting. It turns out that it can cut wood and “soft metal,” and that the screws in the wall are made of hardened steel. When I put in a “bimetal” blade, I was ready to go, and the multitool worked quickly to cut the spikes that were sticking out of the ground quickly.

On the flat part of the interface used to line up the blade, there are less bumps than on my older multitool. There are four bumps in total. Doesn’t seem to make a difference in how well the blade is aligned. When you buy this kind of knife, there are two separate parts: a screw and a flange to hold the blade. This is not the case with other types of knives. These should be combined so it’s easier for people to keep track of both at the same time, I think. Buyers may also want to get a set of more blades because this tool comes with only five types.

A review of the AIOPR 1.5Amp Oscillating Multi Tool Kits with 3 Saw Blades, 1 Semi Circle Blade Sanding Plate, and 6 Sanding Pads, which have a lot of different things (86221)

Leave a Reply

Your email address will not be published. Required fields are marked *