Parallel-arm design and heavy-duty steel construction keep vibration and noise to a minimum.
The 25-5/8-by-16-inch steel table has a lot of space. It can be turned up to 45 degrees to the left and 30 degrees to the right.
For blade changes that don’t require any tools, two side panels can be flipped open.
To make it easier to cut inside and adjust workpieces, the upper arm is locked in the raised position so that it can be raised.
An adjustable air pump, two 5-inch blades, a tension release lever, a 1-1/2-inch dust port, an adjustable material hold-down clamp, a 3/4-inch stroke, and a two-year warranty are some of the features of this tool.
In the past, you were able to make very detailed and beautiful cuts. Good times roll with the WEN 21-Inch Variable Speed Parallel-Arm Saw. Take on woods that are up to 2 inches thick with a quick 3/4-inch stroke. To change the speed, just turn the knob. You can set it to go from 500 to 1600 strokes per minute. The parallel-arm drive, which is made of steel, reduces noise and vibration. The 25-5/8 by 16-inch steel table can be turned up to 45 degrees to the left or 30 degrees to the right for angled cuts. You can adjust the air pump to get rid of sawdust from your work area so that you can see clearly. This helps you see better. Keep your work area clean with this and the 1-1/2-inch dust port. When it comes to blade changes, there’s no need to worry. The dual side panels can be opened to get to the bottom blade holder, which makes it faster than ever to switch out pinless or spiral blades. The upper arm is very easy to move and lock in place, which makes cutting inside easier. This package comes with two 5-inch blades: one 5-inch 15 TPI blade and one 5-inch 18 TPI blade. This is the WEN 21-Inch Parallel-Arm Roll Saw. It is 36-1/2 x 16 x 17-3/4 inches and weighs 53.8 pounds. As a WEN product, your scroll saw comes with a two-year warranty, a large stock of replacement parts, and a friendly customer service line. All of this is to make sure that you remember WEN.
