TRIPLE HAMMER TECHNOLOGY: Enjoy faster driving speed, more torque, and less vibration.
The set comes with two 36 Volt MultiVolt 2.5Ah batteries, a charger, and a case.
Up to 1,859 in-lbs of torque, 0 to 2,900 RPM, and 0 to 4,100 IPM (Impacts per Minute.
PROTECTION: Water and dust protection with IP56 certification for protection against water and dust.
MOTOR: Powerful brushless motor technology that lasts longer, has more power, and doesn’t need to be serviced very often.
The “Triple Hammer” 36V Impact Driver Kit is the first of its kind because it has a third anvil. This increases the speed, beats per minute, and torque of the tool.
This is a new way to make any job site even more productive while also cutting down on the size, weight, and vibration of the tools. An impact driver with two batteries, charger, and case from Metabo has the power to weight ratio you need to go beyond normal applications. It has 1,859 in-lbs of torque, 2,900 RPM, and 4,100 IPM, so you can do things that aren’t normal (Impacts per Minute). With the Triple Hammer technology, which has a 3rd impacting anvil, you can go faster and loosen even the most stuck screws. You can also go slow and precise with the variable speed trigger. This tool has four different speed settings, so it can be used for everything from fastening hinges to driving lag bolts with just one tool, all with ease. High-visibility LED lights work well at focusing light on the work area. Any job, even if it’s wet or dirty, can be done with this impact. You can count on your Metabo HPT impact to be safe because it has an IP56 rating. With a Lifetime Tool Body Warranty, you can be sure that this impact will last a long time and work well. Triple Hammer is part of Metabo HPT’s MultiVolt system of power tools that are getting bigger and better. There are both 2.5 Ah and 4.0 Ah MultiVolt batteries that can be used. It also has a unique AC adapter so you can keep going all day. The MultiVolt system gives you the best power and versatility while you’re on the move.
In fact, this impactor easily outperformed my Milwaukee Fuel driver with the 12ah battery. I own the largest Milwaukee Fuel driver. This driver has a lot of torque, so it can handle 10″ long by 5/16″ log hog screws all day. You can choose between an on/off light, four power settings, an ambidextrous belt clip, and a quick charger. It also comes with a really solid, spacious hard-sided case, and it can be charged in less than an hour (about 35 minutes to fully charge the big battery). The driver is small, light, and very well-balanced. It has a grippy, comfortable handle. Metabo 18v battery packs don’t work with this driver, but they work with all of my 18v tools. But I have to say that these multivolt batteries have a lot of power, so I don’t know if I’ll ever need another one.
