Uses 28 degree 2 inch to 3-1/2 inch clipped head and offset round head framing nails to build the frame of the room. The nails are used to build the frame.
For precise flush or countersink nailing, you don’t need a tool to change the depth. The dry-fire lockout feature extends the motor’s life and prevents nails from being missed. With a two-mode switch, it’s easy to switch between sequential and bump fire.
Exhaust covers that move 360 degrees can direct exhaust air away from the user. A no-mar tip prevents damage to working surfaces.
When you toe-nail, the hardened tip of the claw helps keep your toes from slipping.
Compatible with Bostitch 28 degree wire-collapsed framing nails and other types of nails.
Using this 3PLUS H2890SP nailer, you can shoot wire-collated clipped head and full head framing nails that range in length from 2″ to 3-1/2″. It can also shoot nails with a 28-degree angle. It was made for people who work in the field. There are a lot of different jobs that this 3PLUS H2890SP tool can be used for, like framing and roofing. It can also be used to install siding, fences, wall sheathing and subflooring. Rear nail loading is very convenient and efficient, especially for people who do this for a living. When you use it, you don’t need to use any tools to set nail heads at the right depth. The tool has been put through a lot of tests in the most extreme roofing environment at work. It doesn’t matter what the weather is like. If you need a tip that won’t damage your clothes, there is one that will. Activation Mode: single shot or a lot of shots at once.
To do some DIY work at home, I bought this framing nailer. I didn’t want to spend a lot of money on a tool I won’t use very often. I had a full box of Duo-Fast SM 615 3″ 28-degree clipped-head framing nails from a job I did about 15 years ago. I used them to build a house. That was the main reason I chose this model over another one. So far, they’ve worked perfectly after I used about five clips of them so far. In the past, Duo-fast made the SM 615 version but now they no longer do. When this gun was made, that version used plastic tape to keep the nails in the clip. They work great with this gun. However, Duo-Fast also makes a paper tape version called SM 615P that should work in this gun. It works well at 110 psi. Make sure you remove the rubber nose piece for the best performance. Otherwise, the nail won’t set deep enough, even on the deepest setting, even if you remove the rubber nose piece. I can’t figure out why anyone would need a rubber nose piece on a framing nailer in the first place, but one comes with it. People say that I’m very happy with this purchase, and it makes framing a lot easier than putting nails in by hand.
