It’s called a “universal dust suck.” QuickT makes universal surface grinding. An angle grinder dust shroud for a hand-held angle grinder, which fits all known brand 5 inch grinders and polishers, is on sale for $17.99. In this case, the best value professional grinder dust shroud is 5 inches long.
For well-known brand polishers, this is the bes. Uniquely designed 5 inch angle grinder surface grinding dust shroud with a metal arbor holder collar that fits Makita, Milwakee, Metabo, and Dewalt 5 inch hand held angle grinders. The shroud comes with brand-specific collar rings that fit different sizes of hand held angle grinders. A lot of different brands of 5 inch grinders and polishers have the same thing: an arbor. This means that they all have the sam.
It’s easy to get to the wall edges with this sliding dust cover edge. You can reach the flush wall edges with this. To put on and take off the sliding head, you just touch it with your finger. A surface grinding dust shroud that is easy to use.
A built-in adapter lets you connect vacuum cleaners, angle grinder dust collectors, and grinders with vacuum attachments to it. Make your angle grinder with a dust shroud the best one for collecting dust when you grind concrete or any other hard surface.
Removable brushes make it easy to change the dust cover for your angle grinder. It’s easy to change brushes, and there’s no need to change the shroud. Only change the brushes. Attachments for angle grinder.
QuickT GDS701K Metal Collar Universal 5 Inch Dust Shroud with a vacuum attachment for handheld angle grinder vacuum shroud fits known brand 5-inch grinders and popular models. It is designed to keep dust from getting into the air while grinding.
They work with a lot of different types of 5-inch grinders.
It has a unique flexible collar that makes it easy to grip, and collar rings that fit popular 5 inch grinders. In this case, the QuickT GDS701K dust shroud is for handheld angle grinders that measure 5 inches. It fits Makita, Milwaukee, Metabo, and Dewalt angle grinders.
Cleaner Grinding Helps Keep Lungs Health.
During surface and floor grinding, a shroud keeps most of the dust from getting into the air, and a vacuum connects to the vacuum and picks up the fine dust. Flexible brushes on the edges of dust guards make sure that all the dust is removed and kept inside.
It has replaceable brushes and durable shrouds.
These are snap-on brushes that can be changed when they get worn out. The shroud doesn’t need to be changed when the brushes are damaged. Durable body for more time and use. It is a high-value product that does well.
It connects the vacuum hose to the vacuum cleaner.
An adapter for vacuum cleaners is built in. It can be used with most popular vacuums.
It’s Easy to Us.
The Quickt 5 Inch Dust Shroud body is both flexible and strong enough to handle heavy grinding.
Flexible brushes make grinding easier because they match the height of the grinding wheel over time.
It has a 2-1/2″ diameter extra long vacuum hose for the best surface dust suction.
Use Cases to make your poin.
It’s used to grind concrete floors.
For the removal of concrete stoc.
You can also use this method for other surface preparation.
Most of the time, I don’t write about products that I buy. Because I didn’t like how this product worked with my Dewalt DWE 402 grinder, I’m writing this review in the hope that other people will look for a different tool.
When I bought this shroud, I was going to use a Dewalt DWE402 4-1/2-inch grinder. Shroud: The shroud doesn’t fit that grinder because it doesn’t sit deep enough on the grinder shaft to allow attachments for the grinder to spin freely around it. This is why the shroud doesn’t work. It is the lip of the shroud’s brush housing that wheels hit.
I could be attaching the shroud to the grinder incorrectly, which is possible. But since the instructions are just a single page with 8 very basic drawings (with no explanation of what the picture is trying to show), they won’t help with any fitment issues. And the URL that the product’s scan code takes the user to doesn’t have any information that helps with this.
There is a problem with fitment on the Dewalt DWE402 grinder because of the mechanism that moves the grinder guard. I should say that. You can’t see it, but that mechanism is right next to the shaft, and its housing and spring seem to keep its shroud from sitting low enough to let the wheel attach to it.
I’m not going to completely get rid of the shroud. It looks like the shroud is made well and isn’t very expensive. If it fits your grinder, then it’s probably a good thing if you buy it. However, if you buy it and it doesn’t fit your grinder, even though it says it’s “universal,” it doesn’t have any value. You can spend a lot of time trying to get it to fit when, in the end, it just won’t.
