The whole length is 350mm / 13.78in; the diameter of the Cardan Joint is 5mm / 0.2in.
Add to the life of the machine and improve the precision of processing. Cut down on the cost and effect of the process.
Can save up to 80% of the cooling liquid, which has a good effect on cooling down the air. Can cut down on the liquid waste that affects the situation.
In a liquid, you need to keep the air pressure in the range of 5-7KGF / CM2.
Great for a CNC lathe, milling machine, or drill. Lathe, milling, grinding, drilling, boring, and tapping are usually done with this tool.
Specifications.
Features.
– Can be used for high speed cutting and cooling.
– Make the machine last longer and improve the accuracy of its work.
Make it cheaper to run and make things work better.
– Can cut down on the liquid waste that affects the situation.
It can save a lot of cooling liquid. It also has a good cooling effect.
If you want to cut or drill or tap or lubricate, this is a benefit.
It’s made of plastic and metal.
The whole length is 350mm / 13.78in.
There are two Cardan joints that measure about 5mm (0.2in).
This is the weight: 180g / 6.35o.
Notice.
– You must use clean water.
Make sure you don’t get the corrosivity liquid.
It should be between 5-7KGF/CM2 for the air pressure that comes out of the vent.
Viscosity of the liquid should be below 68cST at all time.
Packages come with.
1 x Mist Coolant Spraye.
I changed the way the item was set up from when I first got it. The only reason I was chosen was because of my applicatio. The item was exactly what it said it was and was of good quality for the price I paid. A lot of people say that they would buy this again if they had to.
