Form and function come together in this high-quality, durable, but powerful package from MI. Work at home or at the office can be fun again thanks to rubber grips that don’t slip. With this set, you get 12 S2 Alloy bits and a sleek Aluminum Magnetic Case.
You can use this three speed selector for any kind of project. All kinds of jobs can be done with three torques. Power: 3.6V (6A), 220 RPM. Max. Size: 7 x 1.4 x 1.4 inch, Weight: 0.55 lbs, Weight with Case: 1.5 lbs. All metal gearbox with a corrosion and rust-proof finish.
12 COMMON S2 ALLOY BITS ARE IN THE BOX. Hexagon: H3 H4 H5 H6. Flat Head: H4. Torx: TI5 T20 T25, PZ2 . Bit Length: 2″ Bit Chuck: 1/4″, extension 0.85.
It takes a long time for a battery to charge, but when it’s fully charged, it can finish more than 1000 screws. Recharges fully in less than 1.5 hours with the Type-C USB cable that comes with the phone. Never run out of electricity while you’re working on your own DIY projects. LED Ring lights help people who can’t see well in dark places.
It won an award for its design in 2020. It has instant forward and reverse buttons, 3-speed torque and lock and no LED lights. It also has a rubberized grip, a heavy-duty aluminum case, and a non-slip rubberized grip. You’ll never lose your bits again because the case has clever storage for your bits inside it.
In 2020, the HOTO Straight Power Screwdriver by Xiaomi will be nominated in the International Design Excellence Awards.
Every day, this is the best electric screwdriver for small to big jobs around the home or office, day or night. It comes with three speeds and is easy to use. This is a very well thought out design that comes with a sleek aluminum case that stores 12 bits in the lid. Like a flashlight that can last for a long time, this item is easy to store and carry.
Specification.
It has a max torque of 4 Nm.
This is the power: 3.6V, 6A.
The max speed is 220 RPM.
The Chuck Extension is 0.85.
The battery capacity is 1500 mAh.
1.5 hour.
Weigh: 0.55 lbs.
To put it another way, the total weight: 1.5 pound.
It comes with (12) S2 steel alloy screw bits.
Three PHILLIPS: PH1 PH2 PH3.
Three TORX: T15 / T20 / T2.
There are four HEX: Hex 3 Hex 4 Hex .
1X FLATHEAD: SL.
The first POZIDRIV: PZ2.
Spotlight.
Metal gearbox, strong magnetic motor, can go from -40 to 165 F.
The Li-ion battery can charge up to 1500mAh with a USB port. It can charge up to 1000 screws.
Three-gear torque selector: Low, Medium, and High, for all big and small jobs, no matter how big or small they are.
Lock mode for a screwdrive.
An aluminum case lid that doubles as a bit holder is very clever.
Shadow-free LED Ring Light for evening jobs, with a 10s cut-off time.
It comes with 1 x HOTO Electric Screwdriver.
1 x Aluminum cas.
12 screws driver bit.
1 x USB Type-C cor.
There is only one instruction manua.
This 3.6v screwdriver looks good and is a very good tool for a small amount of money. I was putting a computer together with this tool, and it made the process a lot faster. From small DIY projects to driving small screws into wood, this tool’s motor is strong enough for most of them. In this case, the clutch is not mechanical, but electric. It stops the motor instead, and there are no clicks like there would be with a traditional clutch tool. There are some things this screwdriver can’t handle, like 23mm thick screws with pre-drilled holes in wood. The motor would still drive the screws in on the third clutch, but it’s the slick handle that’s making it hard. In the beginning, it’s a little bit rubbery. But with so much torque, your hand starts to slip off the thing. There are only small projects that don’t fall out of your hands. Even though it looks nice as a ring light and all, the light isn’t very bright. It’s more like a light blue hue than a beam of light. All in all, this is a good little kit that comes with almost everything you need in a small cylindrical case. In the box it came in, there is a usb C cord that can be used to connect to a usb wall charger. There is no charger in the box, but that’s fine because everyone should already have a usb wall charger. I don’t know what it is, but some of the parts in my kit were magnetized. I think that’s a good thing, though. The top part of the case is made of aluminum and has a rubber handle that can be folded down. The bottom part of the case is made of plastic. To me, this tool is more like a piece of art than a tool you can use to your full advantage. With so much power in this motor, you have to really hold on to the tool to use it to its fullest. But it looks good. It fits in the palm of your hand. It’s a good thing to have, because it does what it’s made for and looks good.
