Buy 7-Piece Konfor 5 Inch 7-Step Wet Diamond Polishing Pads Set for Stone Concrete Marble Granite

Made with high-quality Diamond Powder that has been mixed with Resin.

This is great for granite and concrete and marble and stone and tiles, as well as many other things.

It comes with 7 pieces of 5″ Wet Polishing Pads (Include Grit 50, 100, 200, 400, 800, 1500, 3000.

Variable speed and constant speed Wet Grinders and Polishers can use this tool.

RPM: 4500 RPM. A high speed grinder could have used it.

Konfor sells diamond polishing pads for industrial use and a wide range of tools and accessories.

Our products that have a lot of diamond in them cut quickly and aggressively.

It’s best to use the pads wet.

Use the Diamond Premium Wet Polishing Pad to clean concrete, granite and travertine stones. This pack comes with 7 pieces of 5 Inch / 125mm Resin (more durable than standard grade polishing pads) Diamond Pad.

A package comes with.

For polishing: 1 X 50-Grit Pad.

One set of 100-grit polishing pad.

One set of 200-grit polishing pad.

Polishing Pads: 1 set of 400-grit pad.

Polishing Pads: 1 set of 800 girt pad.

Polishing Pads: 1 x 1500 girt.

It comes with 1 X 3000 Girt Polishing Pads.

Also, we sell the same grit in a set of 7pcs, like Grit 50 of 7 pcs or Grit 100 of 7 pcs. When you buy, you can write in the comments which grit you want.

INSTRUCTIONS.

The rubber backer for the variable speed angular hand grinder should be put on after that.

Attach the Velcro loop side of the polishing pad to the Velcro loop side of the backer, so they form a strong bond together.

Make sure that the pad is in the middle of the backer pad so that it doesn’t move. If it isn’t centered, the life of the polishing pads will be cut short.

It’s best to do this for the best results and for your own safety.

Please don’t use the grinder unless you have safety glasses and gloves on. When you work, add a little water to the surface.

In a small space, you can use these by hand. It’s important to keep everything wet. I used them both with an air tool and by hand. As other people have said, there is a “break-in” period where they feel really smooth. The diamond grits cut when you get used to them.

Leave a Reply

Your email address will not be published. Required fields are marked *