The insert plate for the router table is made of aluminum alloy, which is strong and doesn’t get rusty very quickly. Check the size of the picture.
An easy way to do somethin. Applicability: This part is for a woodworking router that has a hole spacing of 62mm to 70mm. This part is for the M372, 3709/3703MT370, M1P-FF 6/02-6/03-6/04-6, R3-6, wu619, and other routers with a hole spacing of 62mm to 70mm.
The size of the router table plate is 235mm x 120mm x 8mm / 9.3″x 4.7″x 0.3″.
Check the size of the picture.
The inserts for the woodworker’s milling table that are easy to us. Please check the size before you buy. For some Woodworking Routers, pay attention to the slots on the back. You need to make holes so that you can put things in. You can come and talk to me if you have any questions. Check the size of the picture.
Make sure the size of our plate is right for your router.
The second picture shows the exact size.
There is a unit of measurement called mm.
(WARNING!!!!!!.
Features.
It’s a 700C aluminum insert plate for a router table.
* Useful center hole bushing for aligning the router so that it is in the middle of the drill hole when it is being set up.
* Makes drilling very precise and easy to do with any router that you want to put in.
* It helps the trimmer be used in more places, which makes it more useful.
* It’s made of aluminum alloy, which makes it strong and durable.
* It is simple to use.
*100% brand new and high-quality at the same time.
Specifications of this item.
*The plate is made of aluminum alloy.
* The insert material is ABS plastic.
*The color is silver (as shown in the picture.
About 235 * 120 * 8mm/9.25 * 4.72 * 0.31in.
In this package, you will get 1*Router Table Insert Plate.
Screws: 1 Se.
As many insert rings as you wan.
note.
The color of this item may look a little different than the picture on the website because of a lot of different things, like how bright and how dark the screen is.
The piece I got looks like it didn’t go through the last step in the manufacturing process. There’s still aluminum burs from the machining, and the finish is rough and ugly, so it doesn’t look very good at all. I could clean and sand it myself, but what I got doesn’t look like the picture. This is either not what was advertised, or a mistake by QC.
It will remove a bad review if a new item is sent that looks like the post. Thank you very much.
